Recent content by 1064rg

  1. 1

    shim fpr, now leak

    Drove home at lunch-20 miles no leak. Start up 2.5 hrs later- filter gasket popped out, big leak. I removed the BB, drove 20 miles to work, no leak. Hope this fixes it. Thanks everyone.
  2. 1

    shim fpr, now leak

    I put the BB between spring and the piece that attaches to the fuel line. I drove 20 miles home, and 20 miles to work, and no leaks. I will try to remove bb soon.
  3. 1

    shim fpr, now leak

    Sunday I did this to my 99.5 : http://www.dfuser.com/Install%20Guid...tor%20Shim.pdf only I used a BB. Everything went fine. I put 100 miles over 2.5 days, and no prob. Now when I left for lunch today fuel was poooouring out the lid of the filter (around the oring). I R&R'ed the filter (same...
  4. 1

    hpop oil line disconnect?

    Late 99, The O ring on the drivers side rear of the HPOP, the line goes to the pass head, is puking oil. How do I fix this. I was able to tighten it 1/2 turn or so and stop the leak, but I know this is only temporary. How do I remove the oil line?
  5. 1

    photos Haven't seen one of these in a while (Marmon)

    In the mid 90's I worked for a guy that had 2 85ish Marmon cabovers, with 3406 cats, and 9 speeds, and his cousin had 1. All 3 were almost identical. They were all green and white, with the same grill as the one pictured. I belive that they bought them from the Daniels Company out of...
  6. 1

    Exhaust question

    My 95 w/ 3" dp 4.5" straight pipe, 5" chrome big rig turnout in front of tire is LOUD at interstate speeds. At 50-60 not to bad.
  7. 1

    exhaust wall thickness

    Is 14 gauge thick enough? (what is 14 ga thickness in decimal) I see a 4" t-back alum 14 ga listed for sale in diesel pwr for less than $300. I don't need/can't afford S.S. The stock exh lasted a long time, so I think alum will work for me. I just want to do it right the first time as cheaply...
  8. 1

    strange oil leak

    on the powerservice, I had summer fuel in, and the truck sat for 4-5 wks. Once, it was started it ran fine. I have since filled up, and added PS to the tank. About the leak, why does it leak after I shut it off, and not when idle/high idle?
  9. 1

    * Fuel Leak *

    I got some 202 orings on ebay for like just $3. And IIRC 3/8 hose from local parts store.
  10. 1

    strange oil leak

    Here's a little background: last winter my oil cooler was slobbering oil. I removed it, took it to my local psd mech, he rebuilt, I reinstalled. On a cold morning shortly thereafter, but still on the same fuel, it gelled up. I pulled filter, filled w/powerservice, and it started. It sounded...
  11. 1

    up pipe leaks

    I don't have an expander. Any other way? I really don't want to do this again, and I don't want to spend any more $ than necessary. I hope to be buying a new to me SD in the next few months, then I hope to sell this one. Thanks again.
  12. 1

    up pipe leaks

    thank you! so? I remove the turbo, and then remove the up pipes, replace the donuts, and reassemble, correct?
  13. 1

    up pipe leaks

    I have oem, and 350 chevy donuts. I had turbo off 2 yrs ago, IIRC I used someone's DIY article, now I can't find it. help
  14. 1

    up pipe leaks

    My up pipe donuts are leaking badly. Do I remove the turbo, and work my way down, or do I remove the exh manufold, and work my way up? Also do I need new up pipes, or should the old be reusable?
  15. 1

    Any IL, OH, IN, MO people have a 3.8L SC?

    you want the whole car, or just the engine? I have a 93 w/ 88k miles.
See more

Members online

No members online now.
Total: 55 (members: 2, guests: 53)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top