Recent content by 99250

  1. 9

    Question Automatic --- manual conversion?

    I have done this swap on a sc 2wd you have to cut the trans hump out. Your starter will still work though. I have everything to do this swap on a 2 wd trans, cross member, clutch pedal assy, all the hyd for the clutch and a solid flywheel from luk. Let me know if you are interested.
  2. 9

    fs2500 bypass oil filter

    thanks I was going to order their system but i think i will do my research first.
  3. 9

    fs2500 bypass oil filter

    Does anyone have a bypass oil filter and what kind. I have looked at the fs2500 and the amsoil kit. looking for some imput on both systems.
  4. 9

    fs2500 bypass oil filter

    Ive been looking into the bypass oil filter. The company claims a oil change of 40000 miles or better. I didnt know if anyone has any feed back about it. Thanks, Tony
  5. 9

    bio-diesel

    I have a 99 f-250 7.3 i was wondering the effects of bio-diesel. is there any conversions of anysort for the fuel system?
  6. 9

    flywheel torque specs

    does anyone know the flywheel torque specs for a 99 7.3 with a 6 speed? thanks
  7. 9

    trans problems

    well i broke a bolt in my rear yoke wich caused the driveshaft to come out and take my exhaust and tire with it. i pulled my trans to check everything and i have the top two bolt holes broke out? and a junk throw out bearing could this happen because of the driveshaft jolting the trans when it...
  8. 9

    Swapping manual into auto truck?

    yea its up and running but im not done with the floor its my only way to work so i was happy enough for right now
  9. 9

    Swapping manual into auto truck?

    i think i have about 2300 and you can fool the auto pcm all you have to do is take the little black box off of your auto trans and leave it plugged in and the truck will still run the same but i only did that because i was dead in the water i will replace it in a couple weeks
  10. 9

    Swapping manual into auto truck?

    7.3 6 speed tranny, flywheel, and clutch with shifter clutch linkage and pedal tranny wiring harness (will the auto work?) manual pcm (will my auto pcm work?) is the single piece driveshaft the same? does the transfer case mount the same? you will also need a trans crossmember. and im...
  11. 9

    Swapping manual into auto truck?

    it was right where the shifter is but a little more towards the back and that was all the bell housing and everything else clears i will take some pics today
  12. 9

    Swapping manual into auto truck?

    i did have to cut about the size of a regular sheet of paper out of the floorpan i will try to take pics tomorrow
  13. 9

    6 speed

    thanks
  14. 9

    Swapping manual into auto truck?

    I am currently doing the auto to manual swap so far no big problems will post more about it later

Members online

Forum statistics

Threads
30,516
Messages
266,069
Members
14,628
Latest member
Svttim
Top