FYI
When i had the hpop changed in 07 the techs broke the lock clips on the pcm plug (the larger of the 3 plugs. the smaller plugs are the injectors). When it was reassembled they glued the plug into the ficm. Needless to say i had to break the plug to get it out. I have read alot about them...
thanks for the help so far.
I did get the reflash for injectors back in 07 when i got it. the cold start before the reflash is similar to the way it is acting now.
This morning it took a turn for the worse. It kept having a miss for awhile after it was warm. Then when i left work it wouldn't...
Hi guys.
I have a 03 excursion with a 6.0 in it and 107000 miles. The motor is all stock except for a cat back i think. Its been running good since 07 when i got it, and the oasis was very good, not much had been done to it. I did replace the hpop shortly after i got it, but it was on its way...
sorry about that. i just filled out my profile but forgot to put it in my post.
2003 excursion 6.0 4x4 auto trans 90,000 miles. rcd lift 35" tires.
bear
hi guys
well the notices keeps telling i should post. so here it goes. check engine light came one a while back. i checked the codes and p2290 (injector control pressure to low) came up. i noticed no loss in power or anything odd. so i quessed it was the sensor or harness. got a new sensor but...