Recent content by HJohnson

  1. H

    F250 4WD steering issues

    the tires are almost new, but the steering damper is old. Ill try that next thanks. RE: hub assy, not sure exactly where that is but all the bearings in the front were replaced when I did the balljoints. dont know if that covers it or not.
  2. H

    F250 4WD steering issues

    The steering in my 02 PSD 4x4 is vague and loose (truck has 235k on it). Ive replaced the front ball joints and all of the steering linkage/drag link/pitman arm/etc...plus tightened the steering box setscrew. All that helped a bunch, but its still not up to snuff. People tell me that...
  3. H

    Getting a roof rack off

    This is an oddball question, but my F-250 has got two of those Yakima brand roof rails on it, held onto tracks across my camper shell with a keyed lock. The PO lost the keys years ago, so Ive never had the keys. Now I want to remove the racks. How can I do that w/o sawzalling the dumb things...
  4. H

    Help me pick a truck

    its a spambot, move along , nothing to see here.
  5. H

    compressor for air horns

    great writeup, thanks! That's a very nice install.
  6. H

    compressor for air horns

    Nice :sweet would you have any pics of your setup? Im puzzled trying to find a hidden spot for my horns, they are so long. they originally were on the cab of the amby but I dont want them visible.
  7. H

    Intermittent CEL

    yes, the truck is as Henry made it. Agreed on the gauges, I will get them soon. I figure it is boost or EGT-related, but I wont know till I see it. Thanks for the responses!
  8. H

    Chip/programmer for towing only

    I know this topic is beat to death..but Ive got 234k on my truck and NO interest in pushing the envelope - so a 140HP chip aint in my plans. Whats the best option for a 60-80HP, towing/econo upgrade only? I was looking at the Edge evolution since it combines the gauges and programmer into...
  9. H

    compressor for air horns

    I got ahold of some air horns off an old ambulance...one is 14" long, the other 17" long. they are loud as h*ll, which is just right for me :D Id like to put them on my truck. what size/where would I get an onboard compressor to run these on my F-250? TIA :notworthy
  10. H

    Intermittent CEL

    Guys, I have a 02 F250 7.3..completely stock, w 234k. When Im pulling a long hill while towing (not much, only ~ 7500 lbs) where my foot is in it, after ~ a min the Check Engine Light comes on. After I crest the hill and settle back into cruise mode, the light will go off on its own. This...
  11. H

    low sulfer fuel

    If 2-cycle oil helps lubricity, would caaaaaarefully-filtered WMO help as well, if added in a similar ratio (1oz-1gal)? Or are the helpful components of WMO already gone?
  12. H

    air temp sensor

    OK, great. Thanks for the help! :)
  13. H

    air temp sensor

    Hi, new to the site with a question: I read the WIKI about using the NAPA filter mod, but the pics dont explain what to do with the air temp sensor thats removed from the stock airbox. Since the airbox goes away, what do you do with the sensor? thanks, H
See more

Staff online

Members online

Total: 95 (members: 2, guests: 93)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top