ghoff-- the pitman has been dropped and runs parallel to the trackbar. the pivot point is off but i dont think that matters. the latest suggestion is to upgrade to a 35 inch 1250 tire and possibly rear shackles. as far as the tires go, they mentioned something about "scrub" and not having...
bmzebrin-- ive heard about dropping the pitman arm before. Havent had it checked though.......... to me it sounds and feels like something is loose or not seated right in the front end. ive had it checked twice by two different people, and everything looks good. based on the last guy that i...
steering stabilizer goes on on monday. hopefully it helps some. dragon slayer- ive had evrything tightened and lubed twice since ive gotten the lift, and just had it all checked again last week. im really keeping my fingers crossed with the steering stabilizer. its fairly cheap and an easy...
so im having the steering stabilizer installed as soon as it comes in. hopefully it helps. decided to go with the dual stabilizer because two is better than one right?
red 6- not sure if anyone has checked the hubs, i would hope so, ive had two different mechanics pull the front end apart. i looked and they are on auto, though i know that doesnt mean anything. ill have it checked. how would it behave at speed if they were locked? the guy i talked to today...
i just got back from having another guy look at it who actually works on crawlers and he disagrees with using the pro comp lift because the front springs are so stiff. i think im going to try the steering stabilizer and see how that works for now. he also said that everything looks right and...
the thing that sucks is i stayed with the four inch lift because i heard that it really didnt lead to any other problems or require any additional work. once again im ignorant, and it seems to have bit me in the ass.
dieseldork- i guess the truth had to come out sometime--- i dont know crap about trucks, according to them i got everything i needed. i doubt if they installed anything above and beyond the lift, especially since the truck is driving like crap. luckily i found a new guy that i really trust...
JL- i dont know about that, how would i be able to check? i had the lift put on at a "four wheel parts" shop and the guy that did it worked for ford for 18 years( or so i was told). so i assumed they did everything up to par. is that something that can be addressed easily or am i taking the...
yeah and the alignment is good too, one thing i dont have to worry about. there are other issues, its really hard to turn the wheel when im barely moving forwards and there is a thunk when i first roll forward after being parked(while pulling straight out of a spot)