I took your advice and she seems to be snaping back. Guess I was being to easy on it when I got it back from the shop. I huled 2000lbs of rock today for my dad and you could hardly tell it was back there. Except for the fact it rode like a cadillac. I have power off the line and keeps me...
Call the dealer with your vin#. I think it goes off build date but not sure. When cranking what does the high pressure oil pump get to? Mine was building only to 350 to 400PSI and the couputer wont fire till it hits 500.
Thanks fgtex, did some research on the recall and I am seeing alot of the same issue. It does seem to be getting a little better so I want to put somemore miles on it. I saw something when I was reading threads about programers about the tranny having to relearn. Could that be it? Would they...
Dito, iracemine is right. If you had to jump the solenoid to start it sound like a bad one. The netural saftey switch only lets it start in park or netural. Usually if it is bad it will not even click when in park, but will crank fine in netural. hope this helps
Hi San-Man
I just had the same issue on my 05. Look four links down in the same section at my thread "Help Needed Crank but no start Code P2291". There is some great info in there. If you have access to a scanner it will help also. You might also want to call the stealership and see if you...
Here is the short story....
Bought truck a year ago from car dealership in west palm beach FL with 30K on it. Truck was bone stock as far as I know. Now have 40K and broke down few weeks ago with a Bad HPOP and leaking branch tubes. Took into the ford dealer and they fixed it under warranty...
I have my truck back! The Dealer put in a new HPOP and branch tubes. All done under warrenty with a $100 deductable. While it was in they replace my Exhaust pressure sensor and flashed the PCM for some recall they had. Thanks Again guys for all the help and Info.
Randy
Thanks to All for all your advice, Kingkevindavid and Jpring83 you were both right 5yrs/100,000Mile powertrain $100 deductabe. I called for a Hook to take it to the dealership today. I will keep you posted with what I find out. Thanks Again
[/IMG]
Could not get a hold of a guage to test the ICP sensor so I went to ford and bought a new one. Still have the same results, between 380 and a little over 400psi cranking pressure with a no start. How do I tell the differance between a internal leak and a bad HPOP?
I am getting a oil pressure tester (1000psi) to verfie that the ICP sensor is reading the right pressure. 500psi to start? Is that min or normal starting pressure? How long should it hold pressure with the key off. Thank You
not sure if it is connected but saw in other threads but this winter if I left before the truck had enough time to warm up even with being plugged in for hours it would burp out a cloud of blueish grey smoke down the street. The turbo boosted up but the truck wouldnt go over 1000 rpm for about...
Have not been on in a while and need your help guys. Went to leave work with a crank but no start. Never had a issue before that. I have access to a snap on scanner and pulled a P2291 injector control pressure too low code. the pressure builds to a little over 400psi in the first ten seconds of...