Hello All Happy Thanksgiving!
I have a bad locking hub and need a replacement. Mine are labeled LOCK - FREE , what is the difference with the ones that are labeled Lock - Auto?
I need to order online as the nearest Ford store has closed up.
Thanks
I just replaced the Glow plugs on the drivers side due to a Check engine light that came on a while back with codes for the Even numbered Plugs. The harness was ok and so was the gasket. The glow plugs came out no problem. I replaced plugs, wire harness and gasket with for OEM.
Cleared the...
I bet you are looking at Firing order and not the Ford Numbering system. If you look at the GLOW plug Control module wiring you should see Even on one Head and odd on the other.
Thanks for the help.
By the way IF i remember correctly the Cyl contributions test fails because of the crank sensor warranty replacement that ford installed for free.
Been a long time since posted.
2000 SD4x4 stock very low miles.
I wonder what is causing this code.
One thing I have noticed is the truck usually starts quickly and now sometimes I have to crank then turn off the ignition and crank again and it starts normally.
any help would be great.
I think that what they are mostly concerned about is modified vehicles.
I don't know of the statistics but I can bet you that a modified truck pollutes far more than a stock one.
I like more power but there is a price to pay isn't there.
Problem is the nearest Dealer is 1 hour away ( that one) then the next nearest is 2.5 hrs -3 hrs away.
what a frikin pain. What would make somone do this. You can see from the smudge on the electrical connector that someone pulled that off not too long ago.
So now I wonder why I had it in the Dealer specifically for this in January and the old part is still installed, and the invoice says replaced part number
F7TZ-12K073-B " sensor camshaft" "Warranty"
By the way the dealer did not want to do anything until the problem occured again...
Yep that's about right. I hung the cell phone camera on the passenger side of the engine about the ten o'clock position above the crank.
I also saw a pic online for a new one and a few moments ago saw this post on another forums site " This program involves inspecting the Camshaft Position...