Recent content by Teggleston

  1. T

    Picked up a new toy, but have a question!

    I wish that was all it is but I have replaced the set twice in the last 100K and it has not made a difference. I started running Stanadyne Performance Formula additive to my fuel for the first time about 2000 miles ago and am noticing a little difference.
  2. T

    Picked up a new toy, but have a question!

    Mine has been doing this for the last 100,000 miles, I live in Las Vegas and during the winter have to plug it in. I ran conduit and a outlet out in the driveway with a commercial time clock that turns it on and off a couple times throughout the day and night so it ready whenever I am to go. I...
  3. T

    6.0 with overheating issues

    You have to remove the radiator, fan shroud, fan, clutch, serpentine belt then you can get to the water pump! My issue happened overnight, the temp didn't slowly increase it went from normal to through the roof depending on the speed I was doing.
  4. T

    6.0 with overheating issues

    Its easy to replace once you get your clutch off, I had no problem removeing it on mine. It takes about 2 hours in all! I have not found anything better as far as waterpumps.
  5. T

    Help Needed Carrier bearing

    Yes they are pressed on, some people cut them off then use a pipe and hammer to drive the new one on but I don't recommend it. Most shops will press it on for 25-30 bucks!! Good luck
  6. T

    6.0 with overheating issues

    Yep the plastic impellar fell apart, last thing a thought to look at and I was right there when I put on the new fan cluth!
  7. T

    6.0 with overheating issues

    Well after all my tearing apart and replacing thing I discovered the problem yesterday and I feel stupid I realized sometimes you have to walk away from it for awhile. The reason I didn't look at this sooner was I replaced it 1-1/2 years ago, any thought to what this could be? It was the...
  8. T

    6.0 with overheating issues

    OK the rough running thing I found out after tearing everything he did back down was the injector connector was unplugged on the rear drivers side, this was not because he unplugged it but he broke it. I put it all together hoping that was the problem and it fixed the rough running but not the...
  9. T

    6.0 with overheating issues

    no lights, I think I am going to have to remove everything that he did and start tracing it backwards.
  10. T

    6.0 with overheating issues

    4th of July weekend I was about 500 miles from home when I was fueling up and noticed an oil leak. I decided to head home and watch my oil level, truck ran great and got me home, left one heck of a mess on my undercarriage and on my white horse trailer. A week later when the temperature dropped...
  11. T

    Question 6.0 Turbo Freewheelin??

    Been there done that more then once, now I carry a spare clamp:sly I have a straight pipe on my truck and I love to hear that turbo winding down as I walk away, it whisles like a lear jet!!!!!!
  12. T

    Vin information

    Can anyone get me any info on this VIN number 1FTWW33P33ECO1059. I am looking for build date and any other info avalibe or tell me where to go to get it, Thanks:sweet
  13. T

    6.0 will not start cold

    Until you are able to intall a block heater many of the people in Utah use the 500 watt flood lights from home depot or one of the hardware stores and they put them under their truck overnight. It must work because I have seen them use everything from those type of lights to drop lights on many...
  14. T

    CB Radio

    I mounted this unit in my truck, its clean and out of the way Cobra and for an antena I used a Wilson 1000 roof Mount -CB Antennas - CB Radios Plus this was easy to instal in the cab just in fron tof the third brake light, there was plenty of room to intall it. Good luck
  15. T

    Question Front end clunking/thumping while turning

    Sometimes I wonder how I still put my shirt on the right way! That was it I just went out jacked it up and the axle turned with the wheel so I locked the hub then put it back to auto and it freed itself, again thanks for all the help, sometimes it just takes a smack up the side of the head!!!:smack
See more

Members online

No members online now.
Total: 228 (members: 0, guests: 228)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,626
Latest member
jarrburg

Latest posts

Top