Recent content by Tripp16

  1. T

    Question DTC P1670 and P1318

    BJS, is the "P1318 Injector Timing Piston Position Sensor Circuit" something that is related to or controlled by the CPS? I know what the codes are as shown in my original post. I am asking for information on what parts I need to check and how to check them to solve my problem. As for the site...
  2. T

    Question DTC P1670 and P1318

    I have a 99.5 super duty 7.3 PSD with 88,000 miles on it. for the last 2 weeks it has been hard to start. changed oil, oil filter, air filter, and fuel filter 2 months ago. HPOP is full of oil don't see any leaks on HPOP oil lines. scanned truck and it is showing codes "P1670 EF Feedback Signal...
  3. T

    What is the correct amt of refrigerant?

    JLDickmon, Thank you for the information.
  4. T

    Tire Jack recommendation

    hydraulic bottle jack works well for me.
  5. T

    What is the correct amt of refrigerant?

    99.5 F250 super duty has the valve installed to cut off coolant flow to heater core. Blend doors and vacuum controls all working properly. A/C isn't cooling like it should. due to a wreck condenser and dryer were replaced a few months ago and i dont think it was charged enough. I found these...
  6. T

    A/C mod

    LOL, Had I scrolled down after clicking "Go Advanced" I would have noticed "Manage Attachments" and the ability to upload images to the site server were enabled. Alzheimers must be taking hold of my brain. 1 post of wrong information and 1 post with half of the information. At this rate I...
  7. T

    A/C mod

    Instead of clicking Post Quick Reply click Go Advanced. Right under the button that opens the drop down menu for Size you will see an icon that looks like a yellow post card with mountains. When you mouse over it it should say "Insert Image". Click it and put a link to the picture you want to...
  8. T

    A/C mod

    BlueMule, My truck is a 99.5 In the 99's: White pulls a vacuum in Max A/C and Off positions. Blue pulls a vacuum in Off and Floor Red pulls a vacuum in Max A/C, A/C, Panel/Vent, Floor/Panel,
  9. T

    A/C mod

    Big Joe,DezlWezl, The information I posted was wrong. Having done this mod I know the white line kills water flow through core in the Off and A/C Max positions only, and the Red line kills water flow In Vent,A/C,A/C Max. Don't know what I was thinking when I originally posted. Sorry for any...
  10. T

    A/C mod

    *****The information I posted about connecting to the "White vacuum line" was wrong. Sorry for any problems this might have caused***** The correct information is as follows: The White vacuum line only supplies vacuum to the valve(shuts water flow off to heater core) in the MAX A/C and...
  11. T

    A/C mod

    Check to see if the actuator is working when max ac is selected on the valve you installed. With engine off or with engine running you should be able to push the metal rod down with your fingers. With engine running and max ac selected vacuum should have pulled the rod all the way down. If rod...
  12. T

    fan removal tools

    Brian, Thank you very much for the kind offer. I borrowed a thin 1-7/8" pump wrench and will make the one thats used to hold the pulley friday or saturday when I have time to run into town to pick up the parts and work on the truck. Sure is nice to see people willing to help others in this...
  13. T

    Water Pump Filter Boss

    Here's a list of part numbers to install the international/navistar water pump with the integral filter boss on 94-97 ford trucks with 7.3 power stroke diesel. Water Pump, Upgrade to International type with Integral Filter - 1831676C92 International water pump w/filter -...
  14. T

    fan removal tools

    Brian, Thank You for confirming the size of the nut. According to Google seems like the holder wrench opening is 3-1/4"
  15. T

    fan removal tools

    Does anyone know the size of the openings on the fan removal tools? I think the nut is 1-7/8" but have no idea what the size of the opening is on the wrench that spans the four pulley bolts. I see no reason to spend $40.00 or more dollars for something I can make myself. Noticed water pump...
See more

Members online

No members online now.
Total: 48 (members: 0, guests: 48)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top