Search results

  1. troutwest66

    2001 ZF6 wouldn't shift into gear

    Cheaper to start there. Since with engine off everything shifts normal it makes me think master and/ or slave cylinders.
  2. troutwest66

    Mystery plug for programmer

    The programmers and monitors usually plug in to the OBD II port under the dash to the right of the column.That is some aftermarket harness I'm guessing. Probably a good idea to know where it goes. Can you contact the previous owner?
  3. troutwest66

    tailgate seal kit opinions advice

    My tailgate has plenty of room around it actually. Oh, well. I expect dust on a dusty road. Seems to stay on the outside though now that I think about it.
  4. troutwest66

    tailgate seal kit opinions advice

    I've never used one so I can't help. This will at least bump it up for you. :goodluck I just put a Truxedo X15 on my truck but no seal kit. I haven't been on a dry dirt road with it yet so I don't know how much dust I'll get. Usually the top will be rolled up with my quad in the back anyway.
  5. troutwest66

    New to Diesel - Questions

    Instead of cleaner I would research what fuel conditioner works for the 6.7. I use Power Service/ Diesel Kleen in my 6.0 and I used it with my old 7.3 IDI. In Michigan you'll want something for the winter for anti-gel like we do here in Idaho. Power Service has worked for me very well so far...
  6. troutwest66

    New to F-25 & Diesel

    Welcome, Steve!
  7. troutwest66

    Hello everyone!

    Welcome. A lot of great information here. Let us know what you're driving.
  8. troutwest66

    Question What did you do to your truck today?

    Had the tranny serviced in June and wouldn't you know it got a new oil cooler and the EGR cooler went missing?? Next to be put on is the Sinister Diesel Coolant Filter.
  9. troutwest66

    Question No Start.

    I'll beat Dave to it, did you get it scanned? Imperative with these motors.
  10. troutwest66

    New members

    Welcome from Post Falls, Idaho. Kinda close.
  11. troutwest66

    New Member Hello Everyone!

    Don't haul ours as often as we used to but I've learned a few things along the way.
  12. troutwest66

    New Ohio Member

    Welcome. Nice looking rig.
  13. troutwest66

    New Owner! New Guy

    Good find. Hope it gives you many miles of use!
  14. troutwest66

    Question CK-4 Rating Okay for the 6.0?

    Exchanged the CK-4 Delo for some Rotela T6 today at Wally World. Heading out now to change it and the fuel filters. Also, bought the fuel pump/filter drain plug replacement to make that job easier in the future. :sweet
  15. troutwest66

    Doing Some Baseline Maintenance

    I saw that the CK-4 rating is a no go and Delo 5W-40 400LE looks to be discontinued. Exchanged the new Delo for Rotela T6 today and heading out to change it. I hate it when something that works and you trust gets discontinued.
  16. troutwest66

    Question CK-4 Rating Okay for the 6.0?

    I want to stick with the 5W-40 Synthetic. I can get Rotella T6 and Mobil 1 at Walmart today. I will be needing to change the oil tomorrow it looks like. I don't remember what my NAPA has on hand. Suggestions there in the mean time?
  17. troutwest66

    Question CK-4 Rating Okay for the 6.0?

    Haven't heard of the them. Do you have a link? Sent from my Moto G (4) using Tapatalk
  18. troutwest66

    Hello from Coshocton, Ohio

    Welcome. Nice rig.
  19. troutwest66

    Help Needed 6.0 no start

    I'm nowhere near a mechanic so I won't be much help. I always start with having my mechanic do the Ford scan tool to see whats gong on. Too many things to chase with parts. sounds like you took care of any cranking problems unless your batteries don't have enough CCAs.
  20. troutwest66

    Question CK-4 Rating Okay for the 6.0?

    I asked this in another thread of mine in the 6.0 Engine and Drivetrain forum. Just bought Delo 400 XSP 5W-40 synthetic since the Delo 400 LE 5W-40 synthetic seems to be discontinued. The XSP is the CK-4 rated but says it is fine for the CJ-4 rating and all other applications. I'm assuming it's...
  21. troutwest66

    Doing Some Baseline Maintenance

    I'm due for a change in about 200 miles and it looks like the Delo 400 LE is no longer made but the replacement is Delo 400 XSP and is the new CK-4 rated but says on the website and the jug that it is fully compatible with the earlier ratings such as CJ-4. I just bought 4 gallons at Wally World...
  22. troutwest66

    Help Needed 6.0 no start

    Sounds to me a thorough scan is needed unless someone here is familiar with this issue.
  23. troutwest66

    Hello! From Tampa

    Post some particulars on your truck and be sure to fill out your signature with those details. It helps a lot when asking questions.
  24. troutwest66

    New Member from Eastern Washington

    Welcome. Where in Washington? Just across the line in Post Falls.
  25. troutwest66

    New Owner! Hey

    Welcome! Nice rig. :thumbs

Members online

No members online now.
Total: 106 (members: 0, guests: 106)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top