Search results

  1. rgdillon

    SNAKE!

    Long handle floor scraper - I actually hit him harder than I planned I guess. Not enough to kill him - I was just trying to stop him before he got under the washing machine. I have woods behind the house - will toss him out there tomorrow. Ron
  2. rgdillon

    SNAKE!

    So far only found the one more - family is not convinced there is no more - and I'm perplexed as to where the suckers got in from. Here is a shot of the second one - he is almost 4 feet according to the amount of floor tiles he spanned when I smacked him. First one that I didn't get a picture...
  3. rgdillon

    SNAKE!

    No mention of coffee though - :sweet Ron
  4. rgdillon

    SNAKE!

    Allright - got my shotgun on a sling - S&W on holster - Sig on the ankle - combat boots on - welders gloves - chain saw face gaurd with 4 D cell flashlight duct taped to in - I'm going into the laundry room - (note to self - don't shoot the gas line) - Didn't get a picture of the one he...
  5. rgdillon

    SNAKE!

    JESUS H FREAKING CHRIST!!!!!! It's like snake central around here!!!!!!!!!!!!! Animal Control comes and takes that one away - Rat Snake he called it - I go to the damn laundry room to put the plastic container back - ANOTHER damn snake!!!! This one is smaller - maybe 3 feet or so. Smacked...
  6. rgdillon

    SNAKE!

    Pictures? Ummm - I'm not lifting the plastic cover I got over it at the moment! But will try - Yeah - we're having coffee and pastries while we are waiting for Animal Control :roflmao Ron
  7. rgdillon

    SNAKE!

    I know two things about snakes - 1) It's either dead or alive - 2) I don't want one in my hallway - Damn - came down my stairs to my office - and there in the middle of the damn floor is this 5 to 6 foot long snake! WTF - How the hell did this thing get in? I got no cracks or voids...
  8. rgdillon

    Pet-safe weed killer?

    I'm pretty positive that if you follow the directions on any "over the counter" weed killer - once it dries fido will be perfectly fine. Never had any of my dogs get sick from anything I have ever sprayed. Like I say - just let it dry and no problems. Ron
  9. rgdillon

    thinking about buying 2003 f250 6.0

    Well no it's not normal - but it is mechanical and so they do break from time to time. I would not worry about it all. Good luck with it and welcome to SDD :sweet Ron
  10. rgdillon

    Ethanol

    I remember in the early 70's out in Indiana - pull up to the pumps and take your pick - gasoline or ethanol - I think everyone at least tried it, but after a few reported engine problems who were just running the ethanol - it's use kinda died down. They were trying to use Ethanol back then...
  11. rgdillon

    Bed With Tool Boxes Built In -

    It's good if it's ugly - it's going on a Dodge :roflmao :roflmao :roflmao The bosses dodge to be exact :lmao :lmao :lmao Ron
  12. rgdillon

    Bed With Tool Boxes Built In -

    I don't know - do you have a link for them? Googled Royal - but no dice. Ron
  13. rgdillon

    Bed With Tool Boxes Built In -

    Yeah - something like that - but not. I have seen them where they look almost exactly like a stock bed but with the boxes built in. Have been to the Reading site and the Stahl site - but nothing exactly on either. Don't know of any others to check - Thanks, Ron
  14. rgdillon

    Bed With Tool Boxes Built In -

    Need a replacement bed - one of those that look like a normal bed but have the toolboxes built into the sides of them. Anybody have any recommendations on builders of these things - links to them would also be good. Thanks, Ron
  15. rgdillon

    chip help

    Is this the first time you have ever installed a chip? Reason I ask is that I have seen a lot of chips installed - and everyone of them that did not start was due to the contacts not being cleaned properly. Some don't clean enough - and some only clean one side. Matter of fact on my very...
  16. rgdillon

    Advice on an F250 w/6.0

    Welcome to SDD! I'm a little bit biased - but yep - I think they are the best thing out there and will serve you well. One note though - take a look at the 350's also - very little difference in price but you get a lot more load and tow ratings. You will feel better towing that 31 footer...
  17. rgdillon

    7-Zip

    Cause that's what the files came in. WinRar will not decompress a 7-Zip file. I normally pass over files compressed with 7-Zip - but I really wanted these. I have checked all the settings for the program - but just wanted to check if maybe someone was having some luck with it. Ron
  18. rgdillon

    I am a US Citizen

    Well - that's a little far fetched - heck the US gives away billions a year to other nations - that equals US dollars not being spent here. The company that I work for employees just about all Guatemalans. Are they all legal - nope. Do I know which ones are illegal - yep. How do I know...
  19. rgdillon

    7-Zip

    Anybody ever use this? If so - does it run slower than frozen doggy snot for you? I mean damn - same size file that WinRar would do in say 3-5 minutes takes this thing 2 hours. Seriously - have a 1488 MB file decompressing - Elapsed time is 1 hour 20 minutes and 37 minutes estimated...
  20. rgdillon

    have a bet with my cousin

    No - further reading: Navistar International Corporation NYSE: NAV is the parent company of International Truck and Engine Corporation, a leading producer of mid-range diesel engines, medium trucks, heavy trucks, severe service vehicles, and parts and service sold under the International brand...
  21. rgdillon

    Texas Blows up!!!

    Didn't Port Arthur blow up before, like a long time ago :dunno - or am I thinking of a different place down there. Ron
  22. rgdillon

    HX mod

    Neal, Not saying that you can't do this yourself - I just want to remind you that this is a high pressure deal and when they fail - it's always a mess when they do. Sorry I don't have the info you need - Good luck with it - Ron
  23. rgdillon

    Are there many this color in Texas?

    :roflmao :roflmao :roflmao Ron
  24. rgdillon

    EGT

    3:15 - Problem noted 3:23 - Problem solved with part numbers and price Damn near, if not a record :sweet :sweet And that is why this site is the best - :thumbs :thumbs Ron
  25. rgdillon

    I caught a ....FISH THIS Big

    :thumbs :thumbs :thumbs :thumbs :thumbs :thumbs :thumbs Ron

Members online

Total: 101 (members: 2, guests: 99)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top