yesterday afternoon i hooked it up to my scanner to se what codes were on it there was five codes. a baro code a map code a exh back pressure code cam sensor code again and a tranny over heat code. i erased the codes. pulled out my chip and took it for a road test with the scanner hooked up...
yeah its got me stumped right now if its in the wiring its beeing a pain in the butt ive drove over some pretty bumby roads to do a wiggle test not the correct way to do it but it works. and it doesnt have any affect on it. no fuel leaks that i can find. I took the chip out to see if it...
also ill be driving down the road and all of a sudden a few misses not like just one cylinder quits like its shutting engine off. and then right back to running good again
fuel filters are new just changed it over to electric fuel and fuel filters on frame and regulator on return was doing this before i did the change over too. it only does it once in a while not all the time. the fuel pressure is good seventy pounds at regulator.
im a crappy typest
last few weeks my pickup likes to die at idle or when cruising it kind of misses cam sensor code came up took to ford finally did my recall since never once had this problem soon as i drove it away it was doing the same thing so i took the sensor out and put one i had that i knew was...
well got it all hooked up its not finalized really yet. but i made a fitting for the place where the old pump was to hook in to the lines from a hyd fitting and the old nipple off the front of the old pump than put a cheaper regulator in there cause i didnt have the money for a good...
i was just thinking if you could pick one up cheap and baby it till you got your tranny built to hols up in your pickup it would be worth it than just keep patching up your problem
what size do pics have to be to put in the gallery i can never put pics on there no matter what i try to do to them to make them work, im a mechanic not a computer tech
i bought all my parts from racer x, did my own rebuild on mine but i spent 1600 on parts and got a new high flow pump, all new plates and frictions new bushings and new bearings and some new pistons and did the tugger 2 shift kit it would be better just to find a tranny that works out...
ive seen alot of caps that have holes in them not half as bad as that one but looks like something just poked holes in it or like a rat chewed it up. but never seen one look like that i thought it was due to heat and chemicals under the hood. but that was just my thoughts
basically is to get rid of all the extra junk on top of the engine cause it all leaks. the pump is starting to leak so i am gonna have to replace it soon anyways. and i like the way it looks with out that stuff on the top. i can pretty much get everything for free or at a discount. the...
i was looking for info on what people have done to get rid of the fuel filter setup and lift pump on the obs powerstrokes. i dont want to spend 1200 bucks on something i can do for half the price or even cheaper. when i have access to most of the stuff to switch it over. was looking to...
the foot pedal is also electric is a good place to start too might be dirty or broke and you can test that with a meter if you know what the voltage should be i always use a scanner and dont know ahwat it should be off the top of my head