Search results

  1. K

    CCV mod question

    My main thing is to just check out how they are seated in there. But, Hey Bama, how ya been? Still got your truck?
  2. K

    Shimmed FPR

    Was thinking of going with the kit from ITP just so I aint gotta run all over town looking for stainless steel fittings/line! But I gotta buddy that works in a truck shop that can get me a discount on the filter and bass! That one seemed a little pricey.
  3. K

    CCV mod question

    Thanks! I like the idea of the wire tie through them!
  4. K

    DIY INTAKE

    I agree with fgtex on filter prices! I got in a hurry for mine and got one locally.. alot more expensive. Just ordered one from fleet for like $30 something with shipping! Had a little accident with some of the metal clips that I reinstalled that held the old filter box in(almost poked a hole in...
  5. K

    Shimmed FPR

    I'll get the line this week and have it for the weekend! Looks like the Hutch Mod is my next move then. I have a tendency to watch the low fuel light some between fill ups:D! I saw a Tiki for the Hutch Mod so I'll check that out na few. When you say band clamps would the small regular gas hose...
  6. K

    CCV mod question

    Right now I have two of the filters in the canister. Dont quite know how to explain it. The filters are rectangle and I rolled two of them up from long side to long side:dunno and stuffed them into the canister, so I probably got 1/2" of filter media (they are 1/4" thick). You think I should cut...
  7. K

    Shimmed FPR

    What mods are you talking about exactly? Hutch? But either way, no I havent done anything like that.
  8. K

    CCV mod question

    I'm gonna pull them out and check them this weekend to see what they are looking like.
  9. K

    Shimmed FPR

    Finally got around to doing this mod today. Installed the gauge yesterday and had 45psi at idle. Put two #4 washers in and got it to 70 then took it for a test run and it had dropped to 60 at idle. Gonna have to go back in next weekend to add the third shim. Even with the pressure at 60, its...
  10. K

    CCV mod question

    Thanks Joe! Just hope the vent filters are not to restrictive.
  11. K

    CCV mod question

    Got the canister made. Here is some pics. I'll keep yall posted on how it works out. Pay no attention to the wires beside it. (gotta refab that bracket to:D)
  12. K

    Exhaust Brake

    Just to add a little more to this. Tonight is the coldest night we've had since I did this mod and as I was leaving a buddies house I flipped the switch and before I knew it the heat gauge was up and I had heat coming out the vents! The truck was completely cold when I got in it and it didnt...
  13. K

    Wicked Wheel?

    No. I was thinking the wheel came off through the inlet. Probably should read the directions again! What a Idiot!
  14. K

    Wicked Wheel?

    I was doing some modification to my CCV today and had to take the intake hose off the turbo so I figured I'd do a run through of the wicked wheel install with the turbo on the truck. I got the wheel out of the box and held it up too the turbo and its bigger than the air intake hole:dunno! It has...
  15. K

    CCV mod question

    Well I just happened to be in Lowes today and started looking at stuff to make a canister and before I knew it I was walking around with all the stuff in my hand so I just had to buy it!:lmao I found some HVAC vent filters that I figure would work pretty good in it(not restrictive enough to...
  16. K

    Exhaust Brake

    Here is a link to another set of directions for this mod because I'm not sure if this site has it. EBPV Exhaust Brake Take note that its for manual trans only. Maybe theres someone out there that has done this on a auto trans? I'm not sure if its possible to do this on the 6.0.
  17. K

    Exhaust Brake

    I did mine with a set of directions from the diesel stop. I think this site or DG has a DIY instructions on the setup. My instructions said there was a problem with the torque converter lock up but I dont have that problem with my 6 speed:D. I got most of the stuff from radio shack with the part...
  18. K

    Exhaust Brake

    Finally turned my EBPV into a brake the other day and I love it:sweet I had read that you wouldnt feel much difference empty but I sure do. Might hafta go load up some cattle just to haul them around and check it out with a load!:lmao I made a new barcket for my trailer brake box that will hold...
  19. K

    CCV mod question

    Hey thanks guys! I hadnt though about returning it to the air intake like that. Just gotta make me a canister, I got some foam stuff I can use. Oh yeah and find my plastic piece:dizzy to put it back in the intake!
  20. K

    CCV mod question

    Thanks!
  21. K

    CCV mod question

    Bama, what all is in that canister and whys it got two lines(one off each valve cover)? Subman where did you find that kit with the bung and was it very expensive?
  22. K

    CCV mod question

    Thats what I was wondering about was if it would still vent properly if it was in the exhaust. I KNOW what happens when it dont!:doh: I also thought it was like joe said and that it might pull the fumes in like a vacuum, with it at an angle. If I cant figure out a way to do it I'm gonna buy some...
  23. K

    CCV mod question

    You got any idea how they did it. I wonder if it made much difference with the fumes?
  24. K

    CCV mod question

    Didnt wanna hyjack another guys thread! I was wondering if anyone had routed their CCV mod into the exhaust or if that was even possible.:dunno
  25. K

    Largest tire on a stock wheel

    I'm running 305/70 nitto's:doh:(my mileage sucks) on stock rims

Members online

Total: 74 (members: 2, guests: 72)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top