Search results

  1. KansasDiesel

    96 F350 Died on highway

    Opened up the IDM, did not smell anything burnt, no signs of water. I am still not convienced that it is the IDM. :cool: maybe I can find a PSD to test drive for a couple of hours:sorry I really wouldn't do that but I wish I could determine for sure if it's the IDM or not. Still chasing...
  2. KansasDiesel

    96 F350 Died on highway

    I will take you up on that offer to barrow your truck, it won't take long if you got time Sat maybe just go along with me. Would you have time to call Al's I would appriciate it, about a year ago he had a PSD up there. If you got time that is. If not I suppose I can go up there Sat. . A...
  3. KansasDiesel

    96 F350 Died on highway

    Thanks Tony, I think I will get this one opened up and see if the Factory Smoke has left. And if our Avionics guys here at work can figure out what let go of the Smoke. If I need one I will give him a call
  4. KansasDiesel

    96 F350 Died on highway

    Thanks for the warning, We have the static table and precautions at work to help prevent static discharge. I have check the pwr and gnd to the unit, they were fine. While cranking the engine.
  5. KansasDiesel

    96 F350 Died on highway

    LOL Like I haven't already burnt one up... (maybe) Well I am going to take it out and let the electronics wizzards at work look at it and see if they find something bad.
  6. KansasDiesel

    96 F350 Died on highway

    What is the "Joe Servo IDM mod" ? Joat- I would love it if you were closer, Have you worked on these? and where do you find "someone elses" ? I did a yahoo search and coming up empty handed.
  7. KansasDiesel

    96 F350 Died on highway

    I have already started checking wiring, and already swapped the relay with a known good one. and had checked it while cranking. So the IDM is doing the buzz test the program is just telling it to? That is why I find it hard that the IDM is bad. I might go ahead and pull the IDM out and...
  8. KansasDiesel

    96 F350 Died on highway

    I checked voltage at the valve cover plugs, just checked 2 of them. NO voltage. Checked the IDM relay *Good, checked Pwr and Gnd for the IDM both *Good. :( How common is the failure of the IDM ? It is now pointing to the IDM isn't it?? :( Is there any place out there that will...
  9. KansasDiesel

    96 F350 Died on highway

    Joat- Thanks look like you have a point, I installed the old CPS and I have a tack indication and no code on the CPS. Sounds like I had a false CPS indication because the truck stalled. I am setting up to check for DC voltage from the IDM to the injectors now.
  10. KansasDiesel

    96 F350 Died on highway

    No problem about last night we had prayer meeting at church, yes prayed for a soultion for the truck. 82 Ford- I would appriciate the help Fri and Sat, If I can't get this running before Sat. I will need to barrow a truck or rent one. I have checked fuel from the heads, lots of flow. I...
  11. KansasDiesel

    96 F350 Died on highway

    Ya, I was looking at the wiring dia and didn't see an converter, so I figured it was dc. Thanks for conferming that for me. Haven't had time to check the voltage but have disconnected the valve cover plugs the front 2 had oil in them??? Problem???
  12. KansasDiesel

    96 F350 Died on highway

    WOW Thanks guys I haven't had a chance to get back here since 82fordtruck and I were messing with it last night. I am unfamilure with my AutoEnginuity program but I think I had the right sensors to check last night while cranking. I filter my oil well, I always use #2 and heat the engine...
  13. KansasDiesel

    96 F350 Died on highway

    The fuel heater in the fuel filter housing?? I no longer have the stock fuel filter housing, Electric fuel system for diesel, and seperate fuel filter.
  14. KansasDiesel

    96 F350 Died on highway

    *Chip removed *I had 1 fuse blown #21 to the brake controler. Wiring diag shows that's the only place it goes. *Last time I cranked yesterday it threw P1212 Injector pressure, Filled the HPOP with oil. This keeps being thrown after a long cranking. * During cranking after the HPOP was filled...
  15. KansasDiesel

    96 F350 Died on highway

    Yes running veggie, But this has happened all on diesel. I am also not a newbie on veggie. Have been running for 2 1/2 years with no problems at all.
  16. KansasDiesel

    96 F350 Died on highway

    I will check that tomorrow, I have run out of time and daylight today. It makes sence though. I will connect the laptop and check those pressures. Thanks
  17. KansasDiesel

    96 F350 Died on highway

    Twildman, ran out and got the chip out of the computer. your programs BTW :burnit Still a no start situation. :(
  18. KansasDiesel

    96 F350 Died on highway

    Yes rpms are registering. I will try and take the chip, but probably won't have time tonight. thanks
  19. KansasDiesel

    96 F350 Died on highway

    Still Dead???? Any Help??? I was moved off of the 911 truck down forum I guess the others are more important issues.. Any help here that I haven't thought of?
  20. KansasDiesel

    96 F350 Died on highway

    She is turning as normal. I have the batteries charging I will try them with a fresh charge. I remember a couple of years ago when I had a hard start problem that a Ford mechanic said that the computer won't start the PSD if the voltage was too low, even if it was cranking good. That was...
  21. KansasDiesel

    96 F350 Died on highway

    Both batteries were replaced 2 years ago. The voltage is 12.4 just sitting, around 11.2 with the GP on, and when cranking it went down to 10 . There is a min. voltage that will not allow the engine to start from the PCM I think it was 10.2 but not sure. That is why I was jumping the...
  22. KansasDiesel

    96 F350 Died on highway

    Last week I left for work, got 2 blocks away took off on the highway and the truck hesitated then died. The 2 hour wait for the tow truck, I got my computer connected (autoenginuity ford enhanced) and it gave me a CPS fault, I got one that day after getting it towed home. Today I got time...
  23. KansasDiesel

    Checking/Testing injectors...

    :thumbs I agree!!!
  24. KansasDiesel

    Water Pump Questions.

    I have confirmed that the fan will work. Getting the parts and starting today if the rain stops.
  25. KansasDiesel

    Water Pump Questions.

    I haven't decided to do it yet, I Have found most the parts here in town, But the IH parts guy said my fan would not bolt back onto the IH pump. I have read several old post over at TDS and never saw anything that said it wouldn't work. If that's the case I might have to get with you Joat and do...

Members online

Total: 89 (members: 3, guests: 86)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top