Search results

  1. addicted

    Biggest blunder ever!

    Don't worry worse has been done. My dad forgot to put the oil drain plug back in and didn't realize it until he poured 2 qts in and saw them speeping under his feet in the garage :roflmao it was pretty funny. So what is this schrader valve? I've heard these things are impossible to reprime as...
  2. addicted

    Sad day

    Sorry I know how you feel too. I watched my dog get run over by the axels of a trailer she was sleeping under as a freind took off with the trailer. Crushed her chest and I layed with her for her last 10 minutes of life. It was her time to go years ago though. She just appreciated I was there...
  3. addicted

    Tire Rotation

    haha you would have rotated about 7-8 times :) These are pretty tuff tires though and are really made for heavy duty highway driving and that is it. Went in the sand once at the beach back home and it is a no go that is for sure. Yep after closer examination the backs were wore down quite a...
  4. addicted

    Tire Rotation

    Well I moved to a new area a few months ago after a long trip accross the country and I started to feel a vibration on the road comming home especially. The week I moved here I did a U-Turn and hit a huge whole as I went off the road (horrible turning radius and I noticed I sent one of the wheel...
  5. addicted

    Exhaust

    Haha, My Arms do hurt a bit, but only my pecs and I think it is all the push ups I did trying to get ready for my PT test. But thanks again for the help getting yet another project done and letting me know a lot of kits are like that and I didin't screwed up on ordering as usual...
  6. addicted

    Exhaust

    http://www.youtube.com/watch?v=kcbaJfd6OD4 Here we go right before I head to bed. Took it about 1.5 hour to load that puppy.
  7. addicted

    97 f-350 airbags?

    Really I'll have to take a look, never really noticed any indication of it, but then again I never really thought about it. Hopefully it is not one of those things like the block heater where they all came with it.....as mine did not boooo:cussing:
  8. addicted

    Exhaust

    YES So many haters on the all caps. I think he was just trying to say he was really excited :) !!! I know I was. So I ran to the Home Depot and picked up a few 12 9 and 6 inch demo blades. You guys were right. Those things kick ARSE!!! I bent the chepo 6 in 10 seconds. Used the 12 and 9...
  9. addicted

    Exhaust

    Dang I got up at 7 today to get a start on this and git-er-done. But then I realized I forgot the darn 12" blade. The 6" is just not cutting it. Wife wanted me to go into town anyway with her this weekend so I'm off. Trade off for having her go skeet shooting with me, even though secretly she...
  10. addicted

    Offroad tires for my dually..

    I have never owned a duallie and no nothing about them but is there a way to increase the distance between the two wheels without having to purchase new wheels. Like some sort of spacer or does this affect the ability of the wheel to hold the weight or stay on the hub. The reason I ask is I...
  11. addicted

    1995 F250 Dually???

    WOW 95 :) haha Yeah Centurian did some funny stuff with that one unfortunealty not attractive. Truck looks really beat up at least at the tailgate. Not surprising though as it was obviously a tower. Wierd hitch on that reciever in the back. Must be a pretty weak hitch and surprised it...
  12. addicted

    1995 F250 Dually???

    Here is the real question though. What is the point of a F-250 dually? Thought the main reason was because of the wieght. Seems any thing a F-250 could handle the great engineering and quality of tires these days could take as well. I know little, but isn't this the only reason for a...
  13. addicted

    pyro gauge fitting?

    http://www.gts-motorsports.com/gaugemountinst.html Has some good pics of what he describes. I didn't worry about the shavings either. I tried to be careful when drilling and taping and some got in there, but doubt it hurt anything.
  14. addicted

    pyro gauge fitting?

    Easy if you have the Tap :) haha But yea 10 mins to drill and tap. No welding needed
  15. addicted

    WOW Sighting

    Well I will have to try my best with my Camera on my phone or carry my digital around with me. He was near the replacement Company so I think chances are good he just got here....It is a big Ft but I think I would have seen something like this before if it was here. Though I've only been here...
  16. addicted

    What are the temps like in your area?

    Suppossed to get in the single digits with wind tomorrow chill tomorrow here in Central NC.
  17. addicted

    WOW Sighting

    Here on Ft. Bragg today I saw the monster of all trucks. It was a Black F-550. Had what appeared to be a 5" exhaust and had to have some sort of intake and newer turbo as I've never heard a Super Duty whistle like that on so low of RPM's. It was black, tinted window, and had about the...
  18. addicted

    ULSD causing fuel system problems? U decide.

    Well not to impressed with the clean diesel site. Most of it seemed like guess work and common sense. Nothing to support it and it seems like from what I've hear...esp about dates that some of this is wrong. As for the Chevron article that was very interesting. Good to know stuff. I agree...
  19. addicted

    Exhaust

    OK 12 Pak....I just finally emptied my fridge out tonight after a build up over the NEW YEAR...was hoping to keep it empty but I'll pick one up just in case I need it :sly Liquid Wrench....Got that already...Good stuff. I've got a Saws-all but I only have 6" Metal Cutting Blades. I...
  20. addicted

    Exhaust

    So besides the BFH (Big F.....Hammer) any other tools or hints for when I install my DP and exhaust this weekend. I've heard it takes some jiggling and a little hammering in some instances to get it to fit down there. Again I'm horrible at finding already published DIY articles on here so if...
  21. addicted

    DIY INTAKE

    I think the biggest bennifit would be cleaner air from what I have heard about the K&N's. Not sure which specific filter you are running but I imagine the spool up over yours wouldn't be to much different. All I know though is it is a Huge difference in Noise on the Intake side over the stock...
  22. addicted

    Noob with noob questions

    Cavuseeker Welcome to the site. I wonder around TDI forums as well as that is what my wife drives. I lived on the Westcoast...Portland and southern coast and that seems like a pretty fair starting off price for that area. Of course depending on the condition and your haggling skills I...
  23. addicted

    Intercooler

    What type of intercooler do you have? You will have to let us know how much of a drop in PSI and EGT Temps you get.
  24. addicted

    DIY INTAKE

    The part number is the same as NAPA if I remember right I think there is another number or letter in front of it though but it is still a 6637. So you dont have any regular 4" pipe then do you. It is just the 3" 45 degree angle?
  25. addicted

    How to DIY

    Had a question about tranny temp gauges. I just fixed my Boost gauge as the line was bent and stopping the flow..It still is sucking but good enough to work..It really gets wobbly around 12 PSI though. I had switched the polarity on the gauge and it read 300+. I put it back and it still reads...

Members online

No members online now.
Total: 57 (members: 0, guests: 57)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top