Search results

  1. ChrisMartinTX

    Detroit Soft Locker

    Well I think after picking on Travis for his limited slip not working all the time I got what was coming to me... mine is starting to one-wheel-wonder on me. I don't really want an Auburn or anything cause they cost a lot and they do go out. So I was thinking about getting a Detroit Soft...
  2. ChrisMartinTX

    intercooler

    Good - lower EGT's, denser air charge Bad - More lag... gotta pressureize more Ugly - More junk under the hood, have to cut front end sheet metal so everything will fit I plan on doing it. I gotta call powerstrokeshop back but i was checking their catalog and it says 277 for a brand...
  3. ChrisMartinTX

    Exhaust Guide

    i'd be more than willing to be your test subject for the straight piped truck ;) :cowboy:
  4. ChrisMartinTX

    Exhaust Guide

    let us know if you plan on testing one and some results if you do. may have something else to add to the wishlist. sitting at 5000 bucks right now (wishlist with prices on website if you are curious)... only a little more overtime :D . gotta finish this stuff before my gf finishes school and...
  5. ChrisMartinTX

    Exhaust Guide

    cool man... didn't know they were making those. wonder how it would sound on a straight piped truck.
  6. ChrisMartinTX

    What's going on here????

    isn't the cost also going up since its not just the heavy stuff that required less work anymore. isn't it the low sulfur part driving it up as well?
  7. ChrisMartinTX

    Questions about electric fuel systems

    oh btw... i need to verify the carter part i guess. thats just what the website said.
  8. ChrisMartinTX

    Questions about electric fuel systems

    Thank you sir... wanna make sure I have the fuel to back those injectors :D . Now I just need to figure out what I want to do about intercooler plumbing and start kissing the money goodbye :sweet :cowboy: . Oh boy... and to think this all started with a 92 IDI that I didn't know how ran...
  9. ChrisMartinTX

    Questions about electric fuel systems

    I am going to do an electric system at some point but I don't really know anything about what filters are really needed. I really wanted to just use some baldwin (or whatever) heads and filters if possible. I found the Baldwin specs page on their fuel filters about contaminate capacities and...
  10. ChrisMartinTX

    How much is fair for a bumper and grille guard?

    I bought a bumper from a fellow TDS'er and now I have a factory bumper with a ranch hand grille guard bolted to it... ready to go all you gotta do is tighten the 4 nuts. The bumper is in fantastic condition and the grille guard has paint peeling and the little pepper rust thing going on, on a...
  11. ChrisMartinTX

    203 t-stats (again)

    With the stock one I sat at 'n' all the time... With the 203 (has 205 stamped on it) I sit at the hotter part of 'r'. I think it varies a lot from truck to truck on ours. My autometer stays at 200-205 though no matter how I drive and wether or not it 70 or 100 outside.
  12. ChrisMartinTX

    Issue after headlight harness install

    well after scrapping epoxy off i can't figure out the colors really... blue epoxy on a blue metal oxide resistor doesn't really help me. best i can tell its a 470.
  13. ChrisMartinTX

    Issue after headlight harness install

    18~22ma... just need to figure out where to put it. i trust the solder but not the resistors around harness that get yanked on. those little bastards on the back are hard to unplug. :cussing: sorry daryl... i bet you meant resistor ;) i'll go check it out. two days in a row at the...
  14. ChrisMartinTX

    Issue after headlight harness install

    yea if another one lets go anytime soon guess i'll have to put another resistor inline there somewhere.
  15. ChrisMartinTX

    Issue after headlight harness install

    well couldn't sleep this morning after a fire so i figured i would tear into the dash before the sun came up and it got hot... i just blew the led. guess i did something, oh well.
  16. ChrisMartinTX

    Source for a SP4T switch & thoughts on some temp gauges

    would you be at all interested if i put something together with a chip that would cycle through the gauges with a small momentary switch?
  17. ChrisMartinTX

    Issue after headlight harness install

    Well I can't really recall grounding anything out or spiking anything, but I'm sure that has to be it... other than going throught he DRL module there is no way it can isolate itself from the rest of the system. In other words really there shouldn't be a way for me to have the hi-beams if some...
  18. ChrisMartinTX

    Issue after headlight harness install

    I installed my headlight harness and its all nice and factory looking :D , however now my high beam indicator is not working. I cannot really figure this one out. I mean it is all hooked to the same green/black wire. I was looking at the schematic on the Ford CD and seems like the indicator...
  19. ChrisMartinTX

    ZF6 plug same as ZF5 plug?

    Just wondering if I can use the tapped drain plug that they sell for my temp sender. If not then its tap my own or pto cover right?
  20. ChrisMartinTX

    Source for a SP4T switch & thoughts on some temp gauges

    it'd be cool if we could get the same dial one as the chips
  21. ChrisMartinTX

    Source for a SP4T switch & thoughts on some temp gauges

    Since I am cheap (well as much as us PSD addicts can be) and don't really want my trucks cab to look like an airplane ****pit I decided just to get some more sending units and put them on a switch to my water temp gauge. I was going to get a separate oil temp gauge and use that for eng oil...
  22. ChrisMartinTX

    I'm chained up now....

    congratulations! my folks 25th was yesterday.
  23. ChrisMartinTX

    Power Steering pressure hose

    yea thats what i would want if mine hadn't decided to take a dump on me the morning i was moving. i ended up just having to go with the autozone 45 dollar one. do y'all remember what people were drilling out or modding to make it turn a little smoother at low speeds?
  24. ChrisMartinTX

    IDM mod???

    guess he hasn't seen the leds you soldered on your AIC
  25. ChrisMartinTX

    El Cheapo Volt Gauge

    yea i have considered one of those. they used to bug me but the more i "rice-out" and do other things i prolly would have laughed at myself for in high school the more i like them. bean has a steering column pod now for us obs guys but i still wanna see some more pics. plus i don't wanna have...

Members online

Total: 88 (members: 3, guests: 85)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top