Search results

  1. JOAT

    No Horn or Cruise Control

    Hey now HHeynow, you beat me by a few:burnit
  2. JOAT

    No Horn or Cruise Control

    Hope these are clear enough. From '95 EVTM but should be the same. Looking at these, seems a ground issue could cause a fault with both.
  3. JOAT

    No Horn or Cruise Control

    Ahhh, the great Evil Knievel. Inspiration for many a childhood injury, some of which still ache when the weather changes. What don't kill ya only makes ya stronger;tu You said you cleaned and lubed the contacts earlier. Try it again, maybe your lube picked up some crud or wasn't compatible...
  4. JOAT

    Intermittent IPR sticking issue???

    O-rings are new from last year. No warm start problems and the once every couple months related brief choppyness/touchy throttle, has been going on since I got the the truck 2 years ago. Think this may just stay a mystery for awhile. Be alot easier to diagnose if it had a smoke cloud rising...
  5. JOAT

    Intermittent IPR sticking issue???

    I checked the wiring as best as I could. Nothing obvious but I haven't ruled that out either.
  6. JOAT

    HPX line

    Had one on mine, but couldn't tell any difference. Removed it a few months ago but still ran the same. Seems to help some trucks and not others. Cheap mod so worth trying IMO.
  7. JOAT

    Intermittent IPR sticking issue???

    Every few months my truck will have an issue where I go to release the throttle, it goes quiet like it stalled, then it comes back rough, sort of chop-chop sounding, then fine again. The other morning it started doing it after a lukewarm start, but continued. Sorta choppy if I let off the...
  8. JOAT

    DASH

    Done deal, Thanx!
  9. JOAT

    DASH

    Hey Mudwhistle, what colr dash is that F4TZ-1504282-AAY part number for? Want to get it on the parts list;tu
  10. JOAT

    DASH

    Send Powerstrokeshop.com an e-mail, they should be happy to get you the part number. Fordparts.com has done that for me before, but they are slow, slightly higher prices, (and not a site sponser:eek: )
  11. JOAT

    New member

    Hey Casey, welcome aboard!!! How's school going? Give a holler when in Fremont again if you want to scan the truck. Probably won't tell you anything unless there's a problem, but it's fun to run the tests even when everythings working.
  12. JOAT

    Oil heater leaking

    You can pull the oil cooler without raising the engine if you want. -Remove the block heater, then pull the rear header and tube together. -Remove the front header. May be easier to move PS pump out of the way. -Re-assemble in reverse. Thats kid of the glossed over version, but pretty...
  13. JOAT

    Broke my barrel pump, but there's a HAPPY ENDING !!!

    Turns out the gears material is pretty soft, so a file or hacksaw could be used if you're patient enough. Took less than a minute with a freshly dressed bench grinder. I got a little sloppy and got into the side of the gear. Didn't hurt it but looks unprofessional. Next one I'll protect with...
  14. JOAT

    Broke my barrel pump, but there's a HAPPY ENDING !!!

    Went thru several ideas that anyone with an elaborate set of tools could do, but scrapped it for the simple idea below that is within the abilities of any handyperson. I first drove out the roll pin on the gear to the left (see pic in first post) and removed it(mark the gears first so you can...
  15. JOAT

    Another Newbie

    Welcome aboard!!! Hang around and have some fun:burnit I just need to get a few more of you over here and I won't have to go back "there" to read messages any more;) :D
  16. JOAT

    DASH

    I got a nice one from the junk yard. Now 3 months later it is starting to crack. Get a new one and be nice to it :D
  17. JOAT

    Broke my barrel pump, but there's a HAPPY ENDING !!!

    It's fast. With the handle on it's about 1 gallon per 6-7 cranks. With the variable speed drill you can adjust the flow within a pretty wide range. I was pumping thru a screen last night so have yet to see how fast it can pump. You can slow it down to a trickle if you want tho. I'm working on...
  18. JOAT

    Broke my barrel pump, but there's a HAPPY ENDING !!!

    Been using This High Volume Pump from Harbor Freight for several months for collecting oil. It has an impeller similar to a roots blower, and move alot of oil with minimal effort. Much faster and easier than the common vane type barrel pumps. The other day, the small gear inside broke in...
  19. JOAT

    BLUE CPS MYTH

    Interesting test results. I'm trying one in my '95 and really can't tell any SOP difference. Fuel economy, idle, cold starts, etc no change. It has a stronger magnet and costs a few dollars more, and it's a pretty blue. Also the IH guy knew the part number by heart so that to me implies a...
  20. JOAT

    WVO or WVO Diesel Blend

    I've been planning to get some pics and do just that . I've been revising my filtration setup recently so still fine tuning. Will cover my filtration evolution in sort of a ramble/blog for now. As far as the truck goes, a little more insulation and I could likely run partially hydrogenated to...
  21. JOAT

    Chip is in but no WTS light?

    What 'stroker said. If EOT is above 50° F the truck will start without glowplugs anyway on a standard PCM calibration. Could be they programmed accordingly??? BTW if I drove the truck the day before, EOT will still be in the 50-60° range the next morning even if temps were in the high 30's
  22. JOAT

    http://www.diy-injectors.com

    Cool, that'll be fun to play with. I'm curious if anyone knows what effect nozzle calibration has on fuel economy. I'm told TDI's that otherwise seem to run normal can lose as much as 25% on fuel economy with injectors not calibrated the same. Wonder if similar is true for HEUI's.
  23. JOAT

    Speed sensor codes

    Interesting. Would be worth calling those guys and see if they think a bad PSOM could set a speed sensor code.
  24. JOAT

    WVO or WVO Diesel Blend

    :D My ears are ringing. Just got back from Disneyland, 800 miles mostly on heated WVO. There are tons of polymerization rumors but the only ones I've seen confirmed involved bad Bio in 6.0 injectors. The only real issues with blends usually are from not allowing sufficient settling time so...
  25. JOAT

    Speed sensor codes

    Could be a wierd wiring problem, which would be hard to nail down. I'd first change the gear oil and check for metal contamination. Metal particles can cause sensor issues.

Members online

Total: 48 (members: 4, guests: 44)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top