Search results

  1. Dieselpwrdredneck

    Hey CB guru's

    I have a Cobra 29 NW and K40 mag mount, standing wave is just barly over 1 I am ok with CB's but by no means an expert. My CB is as good as you can get with the standing wave and is turned up a bit. but i want to reach out a bit more and i have a few questions: Is anyone running a linear...
  2. Dieselpwrdredneck

    Another use for Glow Plugs? Combustion Temp Sensors

    That is awsome, definatly something to ponder over :sweet Good job on finding this :hail keep us updated Neal
  3. Dieselpwrdredneck

    94 chip install

    When i did mine i did NOT remove the computer. I just took the park brake braket loose and i was able to reach in a clean the terminals good enough and install the chip.. But yes make sure to unhook the batteries Neal
  4. Dieselpwrdredneck

    Boost ?

    i oppted to not get one with vaccume. In the process of contacting Long Island Performance Diesel to get an IssPro 30 psi gauge. Thanks all Neal
  5. Dieselpwrdredneck

    Boost ?

    Does anybody have the boost gauge that also shows vaccume? Do our PSD's show a vaccume on a gauge? Thinkin of upgrading to a real boost gauge and was lookin on ebay (b/c i'm on a budget:rolleyes: ) and they all ahd the vaccume gauges on them, i dont want to get one with a vaccume gauge if...
  6. Dieselpwrdredneck

    Is This A Good Chip?

    i have the TS 6 pos chip with stock, 50, 75, 100, high idle, no start. i can tell a dsmall difference with 100 over the 75 settings. the 100 horse setting smokes a sugnificant amount compared to the 75. Neal
  7. Dieselpwrdredneck

    4" exhaust

    forgot to ask this do you need to bend the firewall on the superduties, i know you do on the obs, but not sure on the superduties thanks
  8. Dieselpwrdredneck

    4" exhaust

    i am asking this for my friend. What is a good easy bolt on 4 inch exhaust for an '01 ext. cab long bed PSD? no muffler or cat will be used He also wants a 3" down pipe Thanks:thanks Neal
  9. Dieselpwrdredneck

    This is Nuts.....

    Check out this video.......:eek: :guns: Huntin Neal
  10. Dieselpwrdredneck

    What do ya think

    it has alot to be desired it id pretty rough. has several issues so i think i will just wait till something else comes along Neal
  11. Dieselpwrdredneck

    7.3 chip

    I am bought it a couple weeks ago from same seller. works great Neal
  12. Dieselpwrdredneck

    What do ya think

    Looked at truck today, private party: 1994.5 PSD Crew Cab, long bed, 4x4, 174,000, from texas so no body rust, body is a little rough with scratches, needs a coat of wax pretty bad, decent rubberaftermarket rear bumper, brush gaurd on front. looks pretty clean underneith no huge oil leaks...
  13. Dieselpwrdredneck

    Do I have to....

    Do i have to change anything on my truck to run say B80? I finaly saw somewere that had bio about 100 miles from here, i go past it once in a while was thinkin about tryin it. Do temps have an effect on it? Thanks a bunch:thanks Neal
  14. Dieselpwrdredneck

    New Fuel

    it might be the new stuff i dont know, but all the pumps still have the warning stickers on them. Neal
  15. Dieselpwrdredneck

    New Fuel

    What will this New Ultra Low Sulfer Diesel do in our old trucks:confused: ? Will it hurt anything? Will new and old fuels still be available? Just thinkin...... Neal
  16. Dieselpwrdredneck

    Hows the weather?

    It's been up and down here supposed to be goin down further though...we have already had snow flurries here a couple of times, no accum. though. 37* w/31* windchill here, at 9:05 pm estsnow for the next 3 days or so...
  17. Dieselpwrdredneck

    Advice please...

    well i went to look at it this weekend and they sold it, so my fiances not happy, but oh well, there are lots of trucks out there
  18. Dieselpwrdredneck

    Advice please...

    No one has had any expirience with this year truck?
  19. Dieselpwrdredneck

    Advice please...

    I am goin to look at a truck for my fiance Saturday, was wonderin if any of ya could give my some tips at what to look at on this year truck as i have little expirience with them. 1998 F-150 XLT 4.6-V8 auto, 4x4, 96,000mls, good rubber, supercab, seems nice in the picture, some minor dings...
  20. Dieselpwrdredneck

    What is your top speed

    Dont know, had her on the peg several times though..... starts to get a bit shaky so it dont stay there long:eek: Neal
  21. Dieselpwrdredneck

    Clunking at 10 MPH

    mine had a weird clunking noise, my brake caliper was loose, the pins were wearing out and it had movement up and down between the 2 brakets. Neal
  22. Dieselpwrdredneck

    turbo surge?

    sounds to me like your exhaust back pressure valve(ebpv) is just functioning as normal. it is a valve in the exhaust similar to an exhaust break, that closes in cool weather to warm up the truck faster. when you give it more throttle it opens for acceleration. Neal
  23. Dieselpwrdredneck

    Chip Instalation

    Well i finally bought a chip, a 6 Position from TS on the way:D . How hard is the instal on this? Thanks Neal
  24. Dieselpwrdredneck

    Where Can I Get a Shift Knob?

    Thats a piston from a 4 cylinder kubota diesel. I epoxied a 14mm 12point deepwell socket in the bottom of the piston, stuck a latex glove over the splines on the shifter and push socket on. then just ripped off the excess laxtex glove. the glove made everything tight and holds it on...
  25. Dieselpwrdredneck

    Help! CB antenna pass through

    I have my CB mounted on the roof and it works pretty good there, its nice and out of the way. Neal

Members online

Total: 99 (members: 1, guests: 98)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top