Search results

  1. ashmass

    Belt Minder frustrations

    My seat belt chime won't shut up. It does not recognize when the seatbelt is fastened. I unplugged the connector under the seat, it's still chiming. I shorted the pins in the connector together, it chimes louder.:eek: Is this a computer problem or do I need to try something else? This...
  2. ashmass

    technical info request

    I need the tech info that SpeedTracer by AutoEnginuity requires. This includes: Curb weight Gear ratio Drag Coefficient Frontal Area Working gear and rear end ratios Where do I get this info for my 06 F250 PSD? I'm interested in using this software. By the way, you guys that don't have...
  3. ashmass

    What's the best intake kit sold for the 6.0?

    RoyRob, Sounds like the final word on that. We can expand this conversaion by answering "What performance products, i.e. chips and tuners, exhaust, etc. best serve the 6.0 platform?" What's your thoughts fellas?
  4. ashmass

    What's the best intake kit sold for the 6.0?

    I'm sure I'll hear a number of opinions on this. I don't want to know the prettiest air filter, I'm looking for real data. What air filter do you KNOW increases air flow, keps air cooler, filters better, etc than stock? It's time for me to change from my stock filter (25,000 miles). I want to...
  5. ashmass

    Please help! 2006 6.0L down in Alaska

    Me too, now I can tow my boat to to the Naknek and get after some giant rainbows.
  6. ashmass

    Please help! 2006 6.0L down in Alaska

    Dpantazis saidit. "Should have been more obvious from the start". First the good news. I started my truck and drove it around this morning. Runs great. I couldn't be happier. Now the part that's gonna make ya'll want to throw rocks at me. It was low coolant in the resevoir. No kidding, I...
  7. ashmass

    Please help! 2006 6.0L down in Alaska

    Hey guys, I went and ran AE on my truck again this afternoon, I was lookinjg fior a way to monitor the HPOP. I didn't find that, but the following code reoccured, B1483(Brake Pedal Input Circuit Failure). I ran the KOEO test and got the following results P1000(OBD Systems Readiness Test Not...
  8. ashmass

    Please help! 2006 6.0L down in Alaska

    dpantazis, I've been educating myself about that HPOP system today and it would be a good suspect for my current indications, or lack of indications I guess. I'm studying up on AE to learn where in the software I can look to find HPOP indicators. I know that the HPOP can bleed off through a bad...
  9. ashmass

    Please help! 2006 6.0L down in Alaska

    I still think he's a dummy. You know, finding that it is actually a simple problem or maybe something that should have been more obvious from the start, these things happen all the time. It wouldn't surprise me, but I sure do know the feeling. It's a 2006 with 24,000 miles. And thanks, once...
  10. ashmass

    Please help! 2006 6.0L down in Alaska

    So the tech I talked to at Cal Worthington Ford in Anchorage is a dummy. He was introduced to me, by the way, as their top diesel mechanic who was gonna get me on the road quick. So much for that.
  11. ashmass

    Please help! 2006 6.0L down in Alaska

    Guys, I just returned from running AE on my truck. After I cleared the existing code, B1483 (Brake Pedal Input Circuit Failure), it did not reoccur. I tried to get a DTC several times. The truck now has no DTC's reported. I ran the KOEO test, it completed with no results. I ran the injector...
  12. ashmass

    Please help! 2006 6.0L down in Alaska

    Yea, I like that runnning truck idea! You wouldn't believe what a hardship this is for me and my family.
  13. ashmass

    Please help! 2006 6.0L down in Alaska

    I'm reading it on the dash. I was told by a tech I talked to at a dealer that the dash should indicate oil pressure after 2 seconds of cranking. If you have a 6.0 you can verify it for me, I don't remember. It's been too long since my truck started. About the codes, I strted with the five I...
  14. ashmass

    Please help! 2006 6.0L down in Alaska

    Thanks for all your input and help. I was told to pull the allen head plug near the crankcase dampener and clean it to restore oil pressure. What is this plugs purpose and name, and where exactly will I find it? Is that vague enough for you guys or does it sound like something I can find. I...
  15. ashmass

    Please help! 2006 6.0L down in Alaska

    I've found that I don't have any oil pressure registering on the dash gauge. So now I'll be troubleshooting that, and a new fault code appeared, Brake Position Sensor. What should I be looking for guys?
  16. ashmass

    Please help! 2006 6.0L down in Alaska

    It turns over. It's on charge right now, I ran the batteries down again trying to crank it. When the Battery Level trouble code came up I put it on charge and will go back tomorrow. It turns over and never sounds like it is trying to fire up, just the starter cranking, nothing else. It's...
  17. ashmass

    Please help! 2006 6.0L down in Alaska

    Diesel fans, Got the AutoEnginuity loaded on my laptop and successfully connected to my truck and cleared all DTC's. I ran the injector test, and all injectors replied with a loud click, all sounded strong. I ran the KOEO test and got no results. I now have no trouble codes and still no...
  18. ashmass

    Please help! 2006 6.0L down in Alaska

    Genysis 2.0 is the reader I've been using, it's what the State of Alaska garage has, where snow plows for our runway are worked on. I have Enginuity but haven't loaded it yet. I'll be working on the truck again tonight, and I'll be taking into consideration the input I've gotten here. I'll let...
  19. ashmass

    Please help! 2006 6.0L down in Alaska

    You got it Crumm, I talked to Rick at Cal Worthington. He seemed to think it was funny. Today I got the truck placed into a garage at work when we took out the snow plow. It will remain there for a few days with the batteries charging. In the meantime I will be on the phone with the dealer I...
  20. ashmass

    Please help! 2006 6.0L down in Alaska

    I'll have to check the voltage on the batteries, she is turning over good, sounds like. I can't hear the injectors for the buzz test. It's 40 below outside and the wind is blowing snow sideways. I'll have to wait for a clear day. I talked to the good folks at Ford that I was having problems with...
  21. ashmass

    Please help! 2006 6.0L down in Alaska

    the codes aresystem voltage low, obd-2 monitor testing incomplete, water in fuel, cam position sensor, and finally crank position sensor. I changed the fuel filters and changed the sensors.
  22. ashmass

    Please help! 2006 6.0L down in Alaska

    iIve got a no start condition on my 2006 6.0 F250. The codes I get are P0562, P1000, P2269, P2614, and P2617. I replaced the cam and crank sensors, it made no difference and the codes still appear. This truck was running fine, I turned it off and it failed to restart. I can't get it to a dealer...
  23. ashmass

    help with '06 6.0

    All the injectors. Is this true?
  24. ashmass

    help with '06 6.0

    injector replaced I installed the injector this weekend. Thanks to everyone who helped me, I appreciate it. The truck runs a lot better.
  25. ashmass

    help with '06 6.0

    Progress so far is new injector sitting in box on my dashboard, I opened the hood and saw nothing that resembled it, shut hood, posted questions on superdutydiesel.com. Not much.

Members online

Total: 53 (members: 4, guests: 49)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top