Search results

  1. 1

    need help on gear ratio change

    Thanks, I thought maybe the front would need to be changed, but had no Idea about the rear. I also saw somewhere there were thick gears available so you didn't have to change carriers but I can't remember if they were for a dana or the sterling.
  2. 1

    need help on gear ratio change

    I have a 2002 srw w/ factory 3.73 ratio. As you can see by the info in my sig. I need to change my ring and pinion in both axels (trannys are getting expensive and the 38's aren't helping things out much) My truck is sitting right now with a lunched torque converter, maybe even a tranny, dont...
  3. 1

    Anyone looking to buy a new head unit for their truck!

    If anyone is looking into new head units for their ride just wanted to let you know that crutchfield is giving a free six disk changer w/ the purchase of a new clarion cd player.
  4. 1

    Article How Old Is Your Vehicle In "People Years"?

    my f 250 is 12 years old and my 1991 syclone is 4.87 years old!
  5. 1

    Transfer case motor does not work 4wd

    jasowiii, I am not sure what the voltage should be there, I just had my brother check the switch for continuity while I was under the truck checking other things and he said it was ok, that was all I knew. But everything you are doing is bringing back memories of a week of pure misery that...
  6. 1

    Transfer case motor does not work 4wd

    The connector on the bottom of the motor itself is the one that powers the motor. All I did was hook up the probes from my multimeter to the car battery then touch the probes to the two little prongs in the connector. The polarity wont really matter if it is reversed the motor will just turn...
  7. 1

    Transfer case motor does not work 4wd

    take the motor off hook a 12 volt battery to it and see if it spins, if not the motor is bad. If it does turn then check the fuses in the fuse panel, if they are good, check your switch, if it is good there is a relay under the hood on the drivers side firewall beside the master cylinder, there...
  8. 1

    Transfer case motor does not work 4wd

    If your fuses are ok get under your truck and look at the wiring harness where it goes around the crossmember and check for a bare or broken wire also. Mine did the same thing, and after I spent the money for a new motor and nothing worked I found that I had a wire that was just rubbed enough to...
  9. 1

    Mileage Estimates

    you will lose about 2 or 3 mpg w/37's over 35's. Bonus is that you probably don't have as many hills in texas as we have in Pa. I had to regear for my 38's and still get only about 14 mpg.
  10. 1

    New Guy

    Welcome to the forum
  11. 1

    New member saying hello!

    I will post some pics as soon as i find out how. I am computer illiterate. By the way I was wrong it is an 8" lift not 10" (the dealership was wrong). the only bad thing is the 38's are on true beadlocks and I cant run them so the dealer threw in a set of new wheels w/37's for free but the...
  12. 1

    New member saying hello!

    Hello everyone, I just purchased my first psd tonight. It is a 2002, f250 with 24,000 miles, 10" fabtech lift and 38's, banks kit and all kinds of goodies. I am pleased w/it so far and looking forward to learning a few things on here.

Members online

No members online now.
Total: 173 (members: 0, guests: 173)

Forum statistics

Threads
30,517
Messages
266,070
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top