Search results

  1. DZL JIM

    Question Any one used or heard of sniper tuning special forces?

    My $.02. I have not worked with it personally, but I have had customers get my injectors with hopes of programming themselves with this software, only to call me back for chip vendor references because it wasn't as easy as they were lead to believe. That's when they are given the phone number...
  2. DZL JIM

    CheapAssDiesel Chip on eBay

    I have talked with guys that are so friggin cheap, that you will never be able to convince them there is any benefit to going with a $400 custom chip over a $70 CheapChips... Then, there are most of us that run the custom chips that would never throw $70 away like that... Bottom line: You...
  3. DZL JIM

    water4fuel

    I got hit in the 'nads the last time it blew up.:eek: So it was priority one to get that problem solved... Oilburner, That is an AWESOME link! EVERYONE should study that thoroughly!!!!!!! It pretty much sums up everything I have learned in the last 2 months!
  4. DZL JIM

    water4fuel

    There's a guy on youtube that's posted a lot on this stuff, can't recall his name. He took a piece of PVC pipe, threaded barbs on each end and filled it with Bronze Wool. you know, like steel wool, but Bronze so it won't corode. I got the Bronze wool off eBay, pretty cheap, $4 I think, but...
  5. DZL JIM

    water4fuel

    I have been working on this for almost 2 months now. A few tips: 1) Take some time and research, research, research, research. THEN experiment. You will NOT hit the gold mine anywhere near your first try at it. I spent 14 hours reading everything I could find online one weekend and learned a...
  6. DZL JIM

    GTS Motorsport IC Kit

    GTS posted on another forum that he's taking a break from the intercooler kits for a while, so he let the site fall off. I have also read that Hypermax will sell their pipe kit w/o the 'cooler for around $500. I got my Banks pipe kit for less than that, but I guess Banks is a real pain to...
  7. DZL JIM

    miss until motor warms up.

    Kev, The Poppet valve(s) in one or more injectors have worn too much. Once the oil warms up a bit they start to work. Simply, you need to have your injectors overhauled, this is highly common with these injectors. Let me know if I can help! ;tu [email protected]
  8. DZL JIM

    IS IT HARD TO MAKE AN AUXILIARY IDLE CONTROLLER ON THE OBS?

    I'll sell you my oem LCD one for $100...
  9. DZL JIM

    HPOP

    Yeah, I'd worry about the drain back, too. Another option might be some small 160cc Hybrids. They use a LOT less HPOil than regular 160 Stage-1's, but are more expensive. Maybe even-out in the long run after figuring in the cost of a new 17* pump, and would most likely run at a higher...
  10. DZL JIM

    DIY-Injectors

    Thanks for the great welcome. :sweet Knick, I tried to get into 6.0 stuff last summer. Definitley not DIY material. With all the negative experiences with the 6.0 (and I've heard alot), and overall lack of interest, I quickly sold off all my stock and said to heck with them. Several calls...
  11. DZL JIM

    how to clean injector ?

    Hope I'm not too late on this... protec.diesel, Buzz test is useless. You can pass a buzz with all 8 injectors removed. Contribution test is the handiest tool of all. It will tell which injectors are weakest. If you have an injector not firing when cold, it's usually due to a worn poppet...
  12. DZL JIM

    No Fan

    From Joat: "The nice thing about the stock fans design is you can haul it around with you for awhile and throw it on in a couple minutes if you need it." :D I actually carried the fan with me to BTS in case I needed it! I don't even know where it is right now. Wished I'd pulled it off my...
  13. DZL JIM

    No Fan

    I pulled my fan off over 2 years ago. Only time the temp gauge (mechanical)even moved above it's normal spot was when I drove to BTS in April and sat in traffic in 85* temps. Even then, the motor was maybe 10* hotter, and I had a 185* stat in it then, so the temp difference didn't matter. Also...
  14. DZL JIM

    BIG Problem !

    Have you tried turning over the motor after working on the plug? If you've had penetrant soaking in there for a while (day or 2 or more?) I've heard of puting a piece of plywood or similar over the motor (cover up your open head, too, with a towel or ??) and cranking it over the stuck plug may...
  15. DZL JIM

    Better Oil Pan???

    No need for an aftermarket oil pan. It's the paint job that sucks. When I replaced my pan, I bought a new 1 from the dealer. Sand blasted it, painted it with a good galvanizing primer, then several coats of rustoleum. That was 5 years ago (?) and it still looks really great. Nothing wrong with...

Members online

No members online now.
Total: 117 (members: 1, guests: 116)

Forum statistics

Threads
30,517
Messages
266,072
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top