Search results

  1. N

    Which chip?

  2. N

    Needed 6.0/torq-shift stand-alone harness and controller

    Uh already got that stuff need the harness and stand-alone processor, or someone who can program the OE to stand alone.
  3. N

    Needed 6.0/torq-shift stand-alone harness and controller

    Anybody here know of an available wiring harness and engine/torq-shift controller to retrofit the engine and trans?
  4. N

    Hats off to Ford engineers

    For 5 0r 6 bucks you can go buy a oil pump seal and remove the pump to checkout the timing cover / pump condition all in about one hour including putting it all back together. The only thing that sucks is, if it is like mine out comes the engine to replace the timing cover. All in all I'd do it...
  5. N

    Hats off to Ford engineers

    I decided to do some major maintenance on the engine. Thursday before Thanksgiving dinner I started about 8:00am removing the 7.3 from my truck in my avatar. It looks so intimidating at first glance. However 3 hours later it was on the engine stand. I had anticipated the cracked oil pump...
  6. N

    Beating a dead horse discussion about the huch mod. IDEA.

    I did a friends '01 a couple years back. I'll call him and see if he has his reciept still, so I can post up all the part numbers for everything required. We do so much custom stuff it's hard to remember off the top of my head.
  7. N

    Beating a dead horse discussion about the huch mod. IDEA.

    If you use the uppermost portion of the filler neck off of a 88-2000 Chevy diesel truck you can poke the huge semi truck filler nozzles in it and really fill'er up.
  8. N

    Wiring plan for manual T.C. control

    I have 2 diagrams (very easy to use) but I can't reduce the resolution enough to make them small enough to post here. PM your email to me and I'll send them, or email me at [email protected]
  9. N

    Beating a dead horse discussion about the huch mod. IDEA.

    I just went with the "go with what you know" on this deal. I don't know the exact specs, but the pump I used is an AC/Delco EP386 which is a TBI 88-95 Chevy pickup fuel pump which in my experience internally bypasses @ around 20 PSI on the ones I have tested in the past by blocking off the...
  10. N

    Straight scoop on oil for 7.3

    I bought mine with 80k. It now has 178K. I have put the whole 4 gallons of Rotella T in it the whole time I have owned it (read 16 quarts) and my friend I bought it from did the same thing. No mechanical engine problems whatsoever.
  11. N

    Beating a dead horse discussion about the huch mod. IDEA.

    Mine is on 88 PSI. ZERO FP drop with the submerged pump in the tank. ZERO air in the return. My regulator and return are stock (shimmed as it was when I purchased it from a friend). Standard pickup / sock filter on the in-tank pump. Lots more power etc(quicker boost, more boost, more smoke...
  12. N

    Problem with "water in fuel" light

    What's up Noob? I have an engine (spare in my shop). Wanna try the sensor for free? Welcome to the board. I'm pretty much newb too. I'm working on my Camaro tomorrow or the TT truck. Come by if you get the chance. My cell is 405-520-8450. If I am not there Randy will be there working on his FB I...
  13. N

    Beating a dead horse discussion about the huch mod. IDEA.

    No hassle at all. It's what I do.
  14. N

    Beating a dead horse discussion about the huch mod. IDEA.

    Exactly my point. Keeping the high pressure pump right where it is. There is always some vacuum between the frame pump and the tank pickup, which a high volume low pressure pump in the tank would completely eliminate. Vacuum expands the molecules in air and all fuels have some air in it...
  15. N

    Beating a dead horse discussion about the huch mod. IDEA.

    Just wondering instead of replacing all the fittings etc that you can suck air from between the strainer and the pump. Why not put a submersible style low pressure pump in the tank? Anybody know anyone who may have tried this? The gasoline Ford trucks used this for years in the 80's and 90's...
  16. N

    Engine Sound Question

    "Stealership" ? roflmao
  17. N

    My last truck was a 6.9er

    I still have an '84 model SC, LB, 6.9, 4 speed, 3.54 gear truck. Truck has new injector pump, injectors, glow plugs, and clutch. The body on it is hammered, but it runs like a dream. I would like to sell it if anyone is interested.
  18. N

    7.3 Weak points? What Tranhy mods for towing are MANDATORY?

    Accumulator housing part number is F81Z-7G422-AA. If you are using the sonnax kit this should be the only thing you need to buy if it is scored in the valve bores. Here is a sonnax kit advertised on this site...
  19. N

    trans spewing AFT

    Sorry, I wasn't subscribed to this post and forgot about it. PM me tomorrow between 8-5 or call 405-424-RACE, and I'll ask you a few questions and maybe narrow down your problem.
  20. N

    $42 Cold Air Mod

    That's right up there with the cigar lighter power superchargers on Ebay.
  21. N

    7.3 Weak points? What Tranhy mods for towing are MANDATORY?

    Your slipping is probably due to a damaged accumulator/accumulator housing these are external parts inside the pan and you do not have to remove the trans to replace them. What happens is the fluid pressure leaks past the seal in the accunulator, or the gouges in the accumulator housing. More...
  22. N

    7.3 Weak points? What Tranhy mods for towing are MANDATORY?

    BTS uses Precision Torque Converters www.converter.com
  23. N

    Question about CCV mod.

    The bad thing about it is if you sue the government agency who puts you through hell, the person who screwed you in whatever way will probably never received anything negative from it. They can't lose their job because of it the way I understand it. They need to be held accountable in criminal...
  24. N

    Question about CCV mod.

    I voted the year these idiots were elected and I didn't vote for them anyway. It probably won't matter. Even the news stations I have found out now have ran major stories about how numerous people are driving aorund with suspended licenses due to this.
  25. N

    Question about CCV mod.

    I have had it proven to me again the right hand of law enforcement doesn't know what the left hand is doing or even what the right hand is doing either. The supposed tickets weren't even the reason for my suspension. After I went this morning and gathered all the proof I would need to prove the...

Members online

Total: 40 (members: 1, guests: 39)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top