Search results

  1. F

    Gooseneck hitch/exhaust relocation bracket

    Bought a 2006 Ford F350 recently and it had a gooseneck hitch already installed....however, whoever installed it did not move the exhaust to clear it.....It rubs and vibrates badly....is there a kit out there or relocate the exhaust so that it doesn't touch the hitch?
  2. F

    Question Manual an Auto locking hubs

    Mine doesn't have vacuum actuators at the hubs....only a vent tube for the bearing assembly.... I'm pretty sure they are manual....I noticed that the manual hubs are more expensive....sounds like my luck updated my sig....I'm a first timer on this forum, so work with me:innocent
  3. F

    Help Needed Problem with front locking hubs

    It is a 2000 f350 dually....it has a switch on the dash to engage the 4wd, but no vacuum lines to the hub assembly....the ones advertised show manual and auto available, but the look the same in the pics.
  4. F

    Question Manual an Auto locking hubs

    I have a question for the pros....I have a 2000 Ford f350 crewcab dually 4wd.....having to replace the locking hubs because the existing ones will not disengage when rotating the lock on the hub.....looking at replacements and some are for manual and some are for auto....I have a switch on the...
  5. F

    Question Programmers

    Mine is a 2000 7.3L.....which DP Tuner did you get? Also.....I have a stand alone Trans Command from Banks....will there be a conflict with the two together?
  6. F

    Question Cold Air Intakes

    Thanks, big guy.....I'll will be doing that mod for sure:sweet:sweet:hail
  7. F

    Question Cold Air Intakes

    Any web info on this I could see?(youtube, etc.)
  8. F

    Looks like me and you have the same type truck....are you having good luck with yours?.....I...

    Looks like me and you have the same type truck....are you having good luck with yours?.....I definitely love mine....the 7.3 has been awesome so far
  9. F

    Question Cold Air Intakes

    I noticed that this kit doesn't have any bracket to block off the hot air in the engine bay.....could that make a difference???
  10. F

    Door ajar light

    That's exactly what it is....crud on the switch stem....holding it open
  11. F

    Help Needed Problem with front locking hubs

    everythings good on the wheel/bearing assembly.....there isn't a retaining nut....this is a sealed assembly that attaches by 4 bolts on the back of the knuckle
  12. F

    Help Needed Problem with front locking hubs

    tried backing up....that doesn't help....the T-case is operating ok.....the only way I can get them to unlock is by jacking up the front end and messing with the axle shaft and rotating the wheel back and forth
  13. F

    Help Needed Problem with front locking hubs

    I recently replaced the bearing assemblies on the front of my 4WD dually....now having problems with the locking hubs....they lock in ok, but when I unlock them, the front drive train stays locked....won't disengage....can anyone offer some advice on what to do?
  14. F

    Door ajar light

    Like the Dogman says....the switch is now in the door latch....I had the same problem....it's hard to get to and I can't find any replacements....I took mine apart and cleaned the switch real good and lubricated it....it did the trick....haven't had any probs with it since
  15. F

    Question Programmers

    Looking at programmers for a mod......I like the Edge Evo because of the display with lots of options....looks like prices are between $500 and $600....has anyone had any good or bad things to say about it?...what r everyones thoughts on the Edge?
  16. F

    Question Cold Air Intakes

    Looking at cold air intakes for a mod......wondering which ones the best for the $$$......Banks has one I'm kinda leaning toward.....its a little pricey....what do you guys recommend?:confused:
  17. F

    SuperDutyDiesel.com Giveaway contest!

    I'm definitely in.....who is sponsoring this giveaway?.....I'll do my best
  18. F

    Oil leak at the bell housing

    :rant....I have picked up an oil leak at the bottom of the bell housing coming out at the inspection cover...I took a peak at it and there is not oil on the flywheel...sometimes it leaks a little and one morning I warmed it up and had a spot as big as a basketball...then it went back to a...

Members online

No members online now.
Total: 166 (members: 0, guests: 166)

Forum statistics

Threads
30,517
Messages
266,070
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top