Search results

  1. S

    interior fan?

    I lost first and second speed on my interior fan, anyone have an idea what that could be? I am guessing maybe a fuse? 2008 F250, 4X4, ext cab.
  2. S

    headlights custom aftermarket or OEM?

    They should be here in 4 or 5 days. I got the Spyder auto ones, chrome because I have a chrome grill, with the halo and LED lights in them. I like the look of the black ones but I don't think they would look right with a chrome grill. 2008 F250, 4x4, ext cab.
  3. S

    Trailer light problems

    I had two fuses blown, one in the cab and one under the hood. They have been working fine, I pulled a trailer all last weekend with no problems (fingers crossed). There is a diagram on the cover of the 7pin but it was a little harder to get my tester clamp in there so I used the 4pin...
  4. S

    headlights custom aftermarket or OEM?

    It is a 4wd. sounds pretty straight forward. Thanx Joe. 2008 F250, 4x4, ext cab.
  5. S

    headlights custom aftermarket or OEM?

    I found a set of the Spyder auto ones I really like for $258, were they hard to install, I assume you have to align them after install? 2008 F250, 4x4, ext cab.
  6. S

    headlights custom aftermarket or OEM?

    I broke a headlight today driving back from the lake, I have been looking at aftermarket custom headlights online and I was surprised at how inexpensive they were. Does anyone have a recommendation? Spyder auto has some nice looking "halo LED" type style, I want a quality part, something that...
  7. S

    Trailer light problems

    I had no idea some lights ground on the ball good to know, when I tested them I used the 4 wire ground because it was the easiest to get to, but I will definitely double check the ball next time before chasing fuses.
  8. S

    Trailer light problems

    Thanx Dave and Joe. I found the problem there was a 25A fuse blown under the hood and one in the cab. There are 3 or 4 fuses and 2 or three relays for the trailer lights. When I found the one blown under the hood I replaced it but still didn't have any lights so I dug a little deeper and found...
  9. S

    Trailer light problems

    Hey everyone, I am having an issue with my trailer lights not working. I tested the plug on the truck and nothing. The wiring looks good (no visible signs of damage). I have looked at the manual and it shows 2 relays in the cab fuse box one for each side of the trailer. How do you test the...
  10. S

    Hubs????

    I assume you are having issues with them not locking up in the auto position? If that is the case be sure to check the whole system out, it might not be the hub at all. There is an inner "bladder/hub" not sure what it's called but if it is leaking your hubs won't lock either. I have chased this...
  11. S

    This is Gonna Hurt!

    I agree with Roy I would stick with the parts the shop is dealing with at the time, with the exception of the studs and the EGR cooler, for warranty purposes. As far as the shop you choose in my experience the cheapest shop isn't always the best one, if it were me I would spend a little more in...
  12. S

    Went to look, drove truck home!

    Gebus it is purdy!!! 2008 F250 ext cab 4x4
  13. S

    Hubs????

    Very true dave, a lot to be said for mechanical 4wd, years ago I had a F150 with manual gear box and manual hubs NEVER had any trouble with it, can't buy a truck with a manual set up now. 2008 F250, 4x4, ext cab.
  14. S

    Hubs????

    I am actually considering going with a full manual hub, the vaccum systems on these have a lot of weak links, my whole system is new including the hubs and at times the hubs just won't engage, I think if you just have a little bit of moisture/condensation in the lines they will freeze up, it...
  15. S

    Hubs????

    I will definitely be getting a set of those, all metal, no plastic I am sold!! 2008 F250. 4X4 extcab.
  16. S

    Hubs????

    Warn makes an auto hub? I could only find a manual hub, any suggestions where I could find them? 2008 F250. 4X4 extcab.
  17. S

    Hubs????

    Does anyone know of a good aftermarket replacement auto/manual hub? I have had a lot of problems with the OEM hubs, they are not reliable.
  18. S

    Driveline clunk???

    Just an update installed the new driveshaft clunk is gone, expensive part but problem solved. I still think that is premature for a slip yoke to wear out, my guess it was defective or wasn't packed with grease properly from the start.
  19. S

    6.0 yes or no?

    Do the EGR delete sooner the better on the 6L.
  20. S

    Driveline clunk???

    I will let you know, I bought a airbag system which hasn't been installed yet, I wanted to get this figured out first, so between the airbag, new brakes, new hub, and now a new driveshaft I am tapped out lol, no goodies for the SD for a while I am afraid.
  21. S

    Driveline clunk???

    It's 28,000 miles so like 48,000kms, it's an 08 so no warranty left. Everything else seems tight, it didn't make any noise at all, even when going between R and D, I agree that's a strange part to wear that early maybe it was defective, I still have the factory tires lol. I ordered a new shaft...
  22. S

    Driveline clunk???

    Non of the above, I do haul the crap out of it, and I pulled a gooseneck trailer a little with it. When I took it apart it was pretty sloppy, and I could see that the splines were worn, it would clunk when I started from a dead stop, and I could hear it clunk when stopping, but it seems very...
  23. S

    Driveline clunk???

    I took it apart and greased it, helped a little but the splines are pretty worn so I ordered a new driveshaft, that seems premature I only have 28,000 miles on the truck.
  24. S

    Driveline clunk???

    My slip joint is at the top of my drive shaft, so I would disconnect the top Ujoint from the transfercase and losen the clamp from the driveshaft end? the clamp is a crimp style clamp will I be able to reuse that or should i get another OEM clamp for reinstall?
  25. S

    Driveline clunk???

    Ok thanks Big Joe, any special type of grease I should use on it?

Members online

No members online now.
Total: 139 (members: 0, guests: 139)

Forum statistics

Threads
30,510
Messages
266,056
Members
14,624
Latest member
Romie64

Latest posts

Top