Search results

  1. O

    gtp38 turbine wheel

    Is the gtp38 turbine wheel the same as the tp38 turbine wheel? If not where might i be able to get a turbine wheel? Or does anyone know what wheel is used in some of the upgraded turbos.
  2. O

    950 rpm stall or 1100 rpm stall converter

    anyone?
  3. O

    how many ccs does a diesel innovations mini-me flow?

    thanks tony
  4. O

    how many ccs does a diesel innovations mini-me flow?

    Anyone?
  5. O

    950 rpm stall or 1100 rpm stall converter

    I have the chance to get either a 950 rpm stall speed converter or an 1100 stall speed converter. I have about 300hp at the wheels and about 700 ftlbs of torque what would be the better converter?
  6. O

    possible to install a 6'' lift kit without garage

    I did it two days ago in a driveway and it took a day and a half it sucked doing it by myself with hand tools in 100 degree weather outside.
  7. O

    torque converter core

    mississippi
  8. O

    torque converter core

    Does anyone know where i can get a cheap 4r100 torque converter core to have rebuilt?
  9. O

    Powerstroke feels sluggish after warmup.

    Changed filter and oil about 600 miles ago along with fuel filter. looked like normal diesel but filter media was black in fuel filter. i have an oil leak in the valley too. changed hpop o rings and turbo pedestal orings top and bottom ebpv gutted hole blocked off and plugged. So i believe my...
  10. O

    Powerstroke feels sluggish after warmup.

    When I crank my powerstroke in the morning it runs great has plenty of pep when you give it gas. As it warms up it seems to not be as responsive. you have to prss the pedal harder to get the same result. It begins to feel like i am driving with the brakes on. I think my ipr o rings need to be...
  11. O

    What does code p1746 mean? what could be bad?

    Its a 2002 7.3 4x4. i know the code means ground, faulty solenoid, pcm.
  12. O

    How much horsepower is needed to get an 02 250 in the 14's

    So you believe with an intake and exhaust this setup will get into the 14's? He's also thinking of putting on the gtp-38r
  13. O

    How much horsepower is needed to get an 02 250 in the 14's

    02 4x4 extra cab 7.3. Can 14's be achieved with a ts performance 6 pos chip set on 140 horse setting and a turbonetics turbo? If not what is needed to achieve a 14 second quarter mile?
  14. O

    How many people have swapped a 6.0 tc into a 7.3?

    How much horsepower will it handle? Is John woods the only one who sells an adapter? What is the stall speed on the 6.0 converter compared to the 7.3? Has anyone converted to this converter without Johns kit? The only reason I ask is because I cant get in touch with john.Anyone have any pics of...
  15. O

    7.3 powerstroke feels sluggish

    would it do this if it was overfilled with oil?
  16. O

    7.3 powerstroke feels sluggish

    It really only feels to be sluggish after it warms up to normal operating temp.
  17. O

    7.3 powerstroke feels sluggish

    replaced cps about 700 miles ago
  18. O

    7.3 powerstroke feels sluggish

    I did an oil and fuel filter change tuesday afternoon. Wednesday I drove about 400 miles towing a small trailer that weighs maybe 500 lbs. My truck is set on the 80hp setting. my problem is when I was on my way back the truck felt like it was bucking lightly. the truck had no load on it. Now...
  19. O

    ts 6 pos chip setting for best MPG

    what is the best setting on my chip is best for in town fuel mileage? 2001 f250 crew cab 4x4. 50, 75,100 or 140? also whats the best setting for cruising on the interstate?
  20. O

    Hopping when i hit the brakes.

    There is a bad wobble when i hit the brakes. Its so bad that it will almost shake you out of the seat. It sounds like the driver side wheel is bouncing when i apply the brakes. I have replaced the shocks. there is a clunk in the front end when i go over bumps. Its driveing me nuts. Also the...
  21. O

    eliminate code p0478

    whats the cheapest way to eliminate p0478? can i put a resister in to eliminate the code? I have code P0470 also. I have gutted ebpv.
  22. O

    I have a massive shimmy in the front end when i brake and a clunking noise over bumps

    sorry powerboater its a 2001 f-250 7.3 4x4 lariat short bed crew cab 150,000 no lift stock tires with a monsterous brushguard/bumper on the front. thanks in advance for the help. also just replace the shocks to no avail. it is the rubber isolator. the sshimmy is so bad it almost rattles you out...
  23. O

    I have a massive shimmy in the front end when i brake and a clunking noise over bumps

    In the front end. also when i get under the truck I can move the driveshaft up and down at the center support bearing. its about a quarter inch of play. Is this normal?

Members online

Total: 60 (members: 1, guests: 59)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top