Search results

  1. C

    Engine running crappy

    disconnected egr, no difference.
  2. C

    Engine running crappy

    I'm going to try all that but after doing alot of reading I'm leaning toward the ficm. Went to start it one day and it seemed like the batteries were a little weak and from what I understand a voltage drop will damage the ficm. That make any sense?
  3. C

    Engine running crappy

    Update: Cleaned EGR & turbo. Neither was badly gunked up. Also changed fuel filter. No significant change in the way it runs.
  4. C

    Engine running crappy

    no tests on the injectors. Haven't been to ford yet, had it scanned at the trans place. Fuel filters changed at 67,000. air at 70,000. Had an Edge/attitude but took it off to eliminate it as the problem. Probalbly why I have the KAM code.
  5. C

    Engine running crappy

    Had the turbo off not long ago and cleaned it. There was no damage or visible wear to it.
  6. C

    Engine running crappy

    had a problem sending this post and had to make a 2nd thread. how do I delete this. went to edit and can't find a delete option.
  7. C

    Engine running crappy

    '03 6.0 88,000 MILES Truck has been running crappy lately. Doing some erratic stuff. 1- Shifting into 4 gear takes long like it's slipping. 2- After it shifts into 5th I'll be dring along and it downshifts into 4th by itself. 3- At times it has no power and black smoke from the exhaust. 4-...
  8. C

    Engine running crappy

    '03 6.0 88,000 miles
  9. C

    idle surge

    Is this a dealer item and about how much is it?
  10. C

    idle surge

    when I start my truck in the AM ("03 6.0 diesel) it will idle for about a minute then rev for a split second and return to idle. sometimes the check engine light will come on. If it comes on and I shut down and restart it will usually go off. also sometimes when driving down the road with a...
  11. C

    Cracked wheel

    I have a cast aluminum wheel with a crack about 3" long running from the bead toward the hub. Is it possible/advisible to have it welded? No damage to the wheel other than the crack.
  12. C

    4X not engaging

    tried that. it works fine.
  13. C

    4X not engaging

    I spoke to someone that had the same problem. It was the solenoid on the right fender. The vacuum hose runs thru it and there is an electrical connection to it. Anyone know if there is a way to test it
  14. C

    Help Needed No power

    Happened recently to me. Same year truck 66,000 miles. It got alittle better as it warmed up but not much. Turned out to be the turbo(dirty). Took it off and cleaned it. It ran like a new truck. Never really noticed how much power it was slowly losing over time.
  15. C

    4X not engaging

    Thanks Guys. Can't hear the vacuum pump but maybe I just don't notice it with the engine noise. Tried tracing hoses best I could, the way they're run is difficult, and didn't see any obvious breaks. Heater,AC, controls all work fine.
  16. C

    4X not engaging

    My 4WD is not engaging. Front drive shaft turns free in 2WD mode. If I put the hubs to manual and leave the transfer case in 2 wheel the drive shaft doesn't turn which is telling me the hubs are working mechanically. If I put the tranfer case in 4 wheel and the hubs in auto the driveshaft...

Members online

No members online now.
Total: 55 (members: 1, guests: 54)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top