Search results

  1. 0

    superduty inframe?

    thinking of buying a superduty that has lost compression, i had a 94.5 powerstroke but not very familiar with superduty's. can i get the oil pan and heads off and push the pistons out with the engine still in the truck or do i have to pull it out of the truck? and also i hear all the 6.0 horror...
  2. 0

    95 engine into a superduty

    i have a budy with a super duty that has lost compression and found a powerstroke out of a 95, other than swapping injectors and turbo what issues could you run into to do the swap?
  3. 0

    front axle question

    thanks, so much. if i would have caught this post earlier i was in a city that shows it available
  4. 0

    front axle question

    it's a spicer 50, i am having trouble finding it (passenger sid axle shaft that goes into the diff), does anyone know where i can find one used? i did find it new from bronco gaveyard but they wanted $225 for it
  5. 0

    front axle question

    its a 83 f250 i did find out it's a spicer 50 front axle i just need the long shaft, the one that goes into the diff. i can't find it used, bronco graveyard wants 225$ for a new one
  6. 0

    front axle question

    i snapped a u-joint on the front passenger side 0n my 83 IDI and it beat up the shaft in the process, i found a junk yard that has an axle shaft but they need to know weather my front axle is a spicer 44 or 50, so how do i determine which one i have or will they enterchange?
  7. 0

    front axle question

    i snapped a u-joint on the front passenger side and it beat up the shaft in the process, i found a junk yard that has an axle shaft but they need to know wether my front axle is a spicer 44 or 50, so how do i determine which one i have or will they enterchange?
  8. 0

    best programer for 2000 automatic

    a buddy jsut bought a 2000 7.3 with an auto, it already has exhaust, and a banks wastegate, he's not going to chang injectors or any thing now just needs a chip, which is going to be the best bang for the buck.
  9. 0

    better factory injectors?

    is there any set of factory injectors that could go in my stroke like out of a dt466 or 530??
  10. 0

    best programer for my 94

    yeah i've got the hot unlock for my common rail and i set it to defuel at 1500 and it doesn't take a lot to get it there they run realy hot even stock they can get 1300 pulling a load. i also have the ebv gutted with a three inch down pipe and straight exhaust but i do still need to get a pyro.
  11. 0

    edge box

    i did the same thing i got raped on my edge e-z they advertise it as a chip or program almost and you get it and it is only a resistor.
  12. 0

    best programer for my 94

    i dont have a pyrometer but i dont see how it can be that hot when there isnt that much black smoke from
  13. 0

    best programer for my 94

    will i pretty much get the same results from another chip until i get injectors?
  14. 0

    best programer for my 94

    i am really disappointed wiht the ts on the 140hp setting it doesnt even smoke much, i have modified my 12v cummins and my common rail and i know what modifying factory fuel settings does and with this it doesnt change it like i expected it to. i knew it wouldnt add 140hp but it doesnt even feel...
  15. 0

    best programer for my 94

    i ended up buying a ts performance 6 position with the 140hp. what kind of rwhp can i expect? its a 5spd with intake strait exhaust with 3 inch down pipe and ebpv removed. mabey a cheap used nitrous kit? the truck only wieghs in at a shade above5200lbs with me in it and looks like hell i would...
  16. 0

    best programer for my 94

    what will give me the best performance gains between the superchips micro tuner and edge evolution. i have found these on ebay but i have also considered the dp tuner or ts performance(who both have 140hp tunes) but that would be a lil more expensive. anyways any thought and experiences are...
  17. 0

    injectors cutting off

    i just changed the #7 injector and i was putting the valve cover back on (while engine was running and running perfect) and when i tighten the back top bolt on it cuts off the two back injectors 7&5 and i can loosen it and tap on the cover and they will work again, i can get it a lil more than...
  18. 0

    when did the lug pattern change

    i have a set of super duty wheels that i know only fits the superduty trucks(99 and up) not the old body style (97 and bellow) but what about a 98 model E-250 van? is that the new or old lug patern? basically i am asking if a superduty wheel will fit a 1998 8 lug van.
  19. 0

    #7 injector removal

    the cover squezzed out no problem
  20. 0

    #7 injector removal

    well i got an injector ordered from napa for 83 dollars and and the core is just 6 bucks, and looking at the injector a couple of the rubber seals are torn do you think that was causing the injector not to work? if so i will just keep it for 6 bucks replace the seals and use it as a replacement...
  21. 0

    #7 injector removal

    re glue it
  22. 0

    #7 injector removal

    well i got brave and just pryed it off and come to find out it is glued on and looks as if there where never any flanges for screws.
  23. 0

    #7 injector removal

    thats what my box lloks like but there is no flanges for the screws, if i don't figure it out i will post a pic up later on
  24. 0

    #7 injector removal

    94.5
  25. 0

    #7 injector removal

    it looks as if it should just snap on and off but i would be afraid to pry it off and break it

Members online

No members online now.
Total: 26 (members: 1, guests: 25)

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top