4.5" lift with 36"s?

[clwalker3]

i plan on getting the donahoe 4.5" lift and i want a big tire and i really like the mickey thompson 36x15.50 atz's will the work with that lift, dont really care if i have to do some bumper triming no biggie. thanks for the imput

 

[clwalker3]

oh yea and i drive an 06, 250 cc, sb guess that might help

 

[bartman]

It will probably fit but it will be tight and it may rub.

 

[big_rooster]

Go ahead trimming can fix everything.

 

[Big Stu]

oh yea and i drive an 06, 250 cc, sb guess that might help

That won't work, will rub like crap and why hack on your truck when you can go 6" and make that combo work fine.

 

[Buffs F-350]

Got 35's on my 06 f350 with a 2.5" levaling kit just had to trim a little off the plastic inner fender. Just wach your back spacing on your rims to wide and it will contact the rear lower corner of the fender itself. (nothing a little triming wont fix .

 

[jonlorio]

Got 35's on my 06 f350 with a 2.5" levaling kit just had to trim a little off the plastic inner fender. Just wach your back spacing on your rims to wide and it will contact the rear lower corner of the fender itself. (nothing a little triming wont fix .

is that with factory wheels?

 

[CSIPSD]

I run 37's on a 4" lift with no rubbing... All in the wheel offset.

 

[GOEGLEINBROS]

Yeah, it's all in the offset. My neibhor has 4.5 danahoe with 36s. He said that it rubs a little at full lock ONLY to the LEFT. it looks sharpe.

 

[Buffs F-350]

is that with factory wheels?

No I had 18x9 with 4.5" back spacing. I should have gone with the stock backspaceing and it wound not hve hit the metal just the plactic. If you do 35s I dont think you will rub?