changed hvop and now have haveno oil pressue

The Dude

Full Access Member
Joined
Jan 28, 2006
Messages
66
Reaction score
0
Location
langley b.c.
My rear seal was leaking like crazy so I put a used hvop in,and now I have low amounts of oil coming out the oil line if I disconect it at the oil rail!!! could it be my ior??? need help!
 

strokin'_tatsch

death row inmate #7
Joined
Jan 13, 2007
Messages
459
Reaction score
0
Location
Austin, Texas
you sure that you got the gear on the HPOP seated correctly??? if so i would venture to say that your HPOP that you got isn't in good shape.. if it ran fine before you changed it, but just had an oil leak then my guess is the HPOP.
 

94f450sd

certified nutjob
Joined
Oct 13, 2005
Messages
2,323
Reaction score
0
Location
plymouth,ma
did you replace the orings on the IPR?make sure the bolt for the gear is tight as hell.its going to take a little time before it fires after replacing the HPOP,it needs to refill the reservoir,pump and lines.then it needs to work all the air out as well.i have had trucks take forever before firing up after a pump swap.
 

The Dude

Full Access Member
Joined
Jan 28, 2006
Messages
66
Reaction score
0
Location
langley b.c.
got it runnin!! what a pain in the rear! it took forever to fire, like all weekend! my 2003 fired up in a matter of a minute!
 

Members online

No members online now.

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58
Top