EGR all clean

acjjkamp

Blitz and Harley
Joined
Jun 21, 2005
Messages
273
Reaction score
0
Location
Sacramento, Ca
So I did a little maintenance this weekend and cleaned the EGR.
I only have about 32K on the clock.
Let me say just one thing about doing this, getting that thing off is a btch.


finally got it out

DSCF0670.jpg


I had just drained the fuel separator and used the fuel to clean it. Figure it caused the gunk, it should take it off OK too.

DSCF0671.jpg


While it was soaking, I cleaned out the manifold

DSCF0674.jpg


Dont tell the boss, but I used one of the house glasses...
Soaking in diesel and using a soft wire brush works great.

DSCF0676.jpg


all clean and ready to go back in

DSCF0677.jpg


It may be my imagination, but after driving it for a week now, I swear it has more power again.
Now that I've done this, it's pretty easy. :)
 

i-Henry

Full Access Member
Joined
Jan 27, 2007
Messages
63
Reaction score
2
Location
Yakima, WA
EGR Cleaning.

Looks great. I'll have to give it a try. My motor has about 65K miles on it. I'll have to get a gasket and o-ring kit for the unit first. I'll post pictures of my unit once I pull it. :)
 

architect-builder

Full Access Member
Joined
Apr 6, 2005
Messages
802
Reaction score
4
Location
Jerome, Idaho
Does the o ring and gasket come in that same package? Or do you have the part # for the o ring? I have been needing to do this for ever.

Thanks,

Barrett
 

Todd Tumbleston

Tumblestone
Joined
Feb 7, 2007
Messages
81
Reaction score
0
Location
Oroville, Washington
I just bought my gasket/2o-ring kit yesterday from Nappie.....it was 7buck 99....I have close to 80K on my 6.0 and when I pulled my EGR out, (bitch too) it was no where near that nasty....And, this is after driving 80 miles with a blown intercooler..... blowing black smoke at about 50 horsepower....Today is re-install day....UPS is bringing the rest of my stuff....tensioner....belt....idler pulley.... Now I can reinstall the EGR....The tensioner...belt...idler pulley... fan assembly new banks intercooler....radiator....new coolant...(debating on the coolant filter....and crankerup.........:dizzy
 

BamaSixGun

SDD Super Mod/Staff
Joined
May 19, 2006
Messages
7,050
Reaction score
4
Location
Alabama The Beautiful
I just noticed a few days ago when I was at the Ford dealer, that they
advertise EGR cleaning for 161.50.

You sir, just saved yourself some nice coin. ;tu
 

acjjkamp

Blitz and Harley
Joined
Jun 21, 2005
Messages
273
Reaction score
0
Location
Sacramento, Ca
Does the o ring and gasket come in that same package? Or do you have the part # for the o ring? I have been needing to do this for ever.

Thanks,

Barrett


I got the gasket set at the dealer $9.15

3C3Z-9P455-AB

( By looking at the 4th picture, I threw the bag away already)
 

ckamp52

ckamp52
Joined
May 6, 2005
Messages
514
Reaction score
0
Location
italy,tx and stephenville
the first time i went to get the gaskets from the ford dealer the guy asked why i was just buying gaskets. so i told him and he was like oh we always just replace em i said i know i dont play that game and now the are charging to clean em haha thats great...oh and its always tough the first time but if you clean it about every 20-25k it comes out easier
 

Members online

No members online now.

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58
Top