I'm replacing my rear bumper (finally! 
) but want to route the trailer, license plate, and backup sensor cables as they were. I had to bust loose all the cable clips (don't know what else to call 'em). They're taped to the cable and plug into holes in the bumper to hold all in place. They measure about 5/16" diameter by 3/4" for the plug part, and 3/8" x 2-1/4" for the part that is taped or zip tied to the cable.
The photo below is this similar product here-it's all I can find after a 1/2-h searching online. It's plug is too short I'm afraid, and it's overall shorter. It claims to be a replacement to Ford E0VY-13A506-A 1979-On; what might be the replacement # for mine?
Any ideas besides going to a dealer next week? I need a dozen of them! Thanks for any help.
) but want to route the trailer, license plate, and backup sensor cables as they were. I had to bust loose all the cable clips (don't know what else to call 'em). They're taped to the cable and plug into holes in the bumper to hold all in place. They measure about 5/16" diameter by 3/4" for the plug part, and 3/8" x 2-1/4" for the part that is taped or zip tied to the cable.The photo below is this similar product here-it's all I can find after a 1/2-h searching online. It's plug is too short I'm afraid, and it's overall shorter. It claims to be a replacement to Ford E0VY-13A506-A 1979-On; what might be the replacement # for mine?
Any ideas besides going to a dealer next week? I need a dozen of them! Thanks for any help.
