Engine Oil Temp location

[BIG JOE]

Does anyone know a good un-used port, or place on these 7.3s where you could install an Engine Oil Temp thermocouple ?? I don't want to use the pan drain or drill & tap holes in anything......





JOE

 

[whatabudro]

Does anyone know a good un-used port, or place on these 7.3s where you could install an Engine Oil Temp thermocouple ?? I don't want to use the pan drain or drill & tap holes in anything......





JOE

I did a thread on this a while back, Bill said on the aluminum oil filter housing. I don't have time now but I can find the thread later. Search all posts by me and it will be a month or so ago.

 

[powerboatr]

there is two unused tapped ports just behind the oil cooler, i used them to plumb my oil guard.
I beleive they are 1/8 pipe .
its been awhile
one is on the block and one in teh previously stated alum housing.

Does anyone know a good un-used port, or place on these 7.3s where you could install an Engine Oil Temp thermocouple ?? I don't want to use the pan drain or drill & tap holes in anything......





JOE

 

[whatabudro]

here's the thread.
http://www.superdutydiesel.com/forums/showthread.php?t=874