Jun 20, 2011 #1 Torqueshift SDD Junior Member Joined Jun 14, 2011 Messages 35 Reaction score 0 Location Carmel, NY Air chisel......time.
Jun 20, 2011 #2 DaveBen SDD Senior Member Joined May 31, 2005 Messages 9,641 Reaction score 84 Location Ukiah, California I am guessing you want to remove the ball joints. An air chisel will work, but so will a swift hit with a BFH on the side of the hole, 90° to the hole that the joint goes into. Dave
I am guessing you want to remove the ball joints. An air chisel will work, but so will a swift hit with a BFH on the side of the hole, 90° to the hole that the joint goes into. Dave
Jun 20, 2011 #3 Stroked68 This is FORD Country Joined Apr 21, 2010 Messages 1,013 Reaction score 0 Location Eudora, KS Oh this will be fun!!!
Jun 21, 2011 #4 JLDickmon ursus combibo Joined Jun 22, 2006 Messages 4,173 Reaction score 12 Location 49041 hammer time... the thinkin' man would buy or rent a ball joint press..
