GOEGLEINBROS
Full Access Member
Just picked up a billit grill (horizontial 1 piece). I was told that I needed to cut out my existing one and this would bolt in. I'm not exactly sure how to do this. I've dove several searches and come up short.
Grill install help Needed
- Thread starter GOEGLEINBROS
- Start date
Got Diesel
Engineering College Boy
Your grill shouldn't have to be cut out in any way. Take the four screws out at the top, and then there is two clips at the bottom and your grill will pop right off.
Late Innings
SDD Junior Member
I think mine had 4 or 6 clips at the bottom but the same still applies. Its a 2 minute job.
GOEGLEINBROS
Full Access Member
I got antsy in the middle of the night and started to fiddle with it. It did come off w/ 4 strews at the top and 4 pop clips at the bottom. I bolted the new on in place and cut out the factory one. I put it all together and it looks great. Now I can't decide if I should put the FORD emblem on.
WD40
Full Access Member
We need a picture.
errol
junior member
its an easy 10 minute (including taking out the old) job. I just now got thru putting in an "all Chrome" orignal grill in my 99 F 350. 4 screws at the top , 2 clips at the bottom, no cutting what so ever! yea Doug I'm camping now , of course I'n fulltimer!