Redneck Ranger
SDD Junior Member
Hey looking for any advice on a cracked HPOP resevoir. I replaced the orings on my HPOP and I must have over tightened the bolts on the resevoir. I have a bad leak on the driver side of resevoir. I applied some JB weld and it worked for a while. As I was watching the leak, it didn't appear to be under as much pressure as I was thinking. Didn't know if its also leaking out somewhere else or the resevoir just doesn't have much pressure. It makes sense to me that the resevoir should have alot of pressure.
My question is will the RTV silicone I applied over the JB weld seal the leak, or will the pressure just blow it out?
Thanks
Redneck Ranger
My question is will the RTV silicone I applied over the JB weld seal the leak, or will the pressure just blow it out?
Thanks
Redneck Ranger