in the market for a power stroke, which one?

blk450er

SDD Junior Member
Joined
Dec 28, 2011
Messages
20
Reaction score
0
Location
Cassopolis/Michigan
My brother n law is going to buy my f150 and now I'm in the market for a power stroke. I'm not planning on doing anything other than intake, exhaust and a programmer. So it isn't going to be heavily modded. Is there any particular model to keep an eye out for or to stay away from? This is my first diesel so I'm very green to them. Thanks
 

blk450er

SDD Junior Member
Joined
Dec 28, 2011
Messages
20
Reaction score
0
Location
Cassopolis/Michigan
I talked to two different ford mechanics and one said stay away from the 6.0s they are always in getting worked on and the other said as long as reg maintenance is performed they are all good.
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
If you are looking for a bullet proof engine, go with a 7.3 liter diesel. The last year they made them is 2003.

Dave
 

blk450er

SDD Junior Member
Joined
Dec 28, 2011
Messages
20
Reaction score
0
Location
Cassopolis/Michigan
Am I safe with any of the diesels with lower miles and doing reg maintenance? Especially with barely doing any mods
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,622
Reaction score
81
Location
Ukiah, California
Not really. For example the 6.0 can blow head gaskets, STOCK. Add chip or a programmer and you have crossed the line. Head studs is the cure, but that is a lot of work to add a chip. I can't speak for the 6.4 or the 6.7, but I have heard nothing bad about hot rodding these, other than the $$$$. Exhaust is the best thing you can do. Be careful with the intakes. K&N filters are NOT good as they do not filter very well. You can add stockings and other things to help out. I will never add a K&N to anything I own.

Dave
 

JRJ04

Senior Member
Joined
Jun 18, 2007
Messages
1,737
Reaction score
4
Location
Houston, TX
Get a 2011 or 2012 6.7L and be done with it. They run great the way they are and they seem to be pretty reliable
 

WD40

Full Access Member
Joined
Aug 23, 2005
Messages
3,455
Reaction score
17
Location
Benton Arkansas
If you can aford a new one that's the way I would go a 2011 or 2012 with a 6.7 is
a powerhouse and get fair MPG. A 2006 or 2007 6.0 with low millage might be a good
deal. I have 78000 on my 06 now and it works hard pulling my 16,000 + fiftwheel
and does a good job of it. Good luck on finding the right truck for you.
Doug
 

Staff online

Members online

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58
Top