E99F250SD
SDD Junior Member
Well - the 295s did not work - ordered a set of BFG 295X75X16 ATOs and they rubbed big time with the stock wheel. The height was good but apparently for me to get them to work I would need to change the wheel and go with something with less back spacing and/or negative offset (if I understand those correctly - I will need to push the wheel out so that the inside/back of the tire/wheel sits further away from the springs.
Any recommendations as to what I should be looking at in wheel specs to be able to get the 295s to fit without rubbing?
Any recommendations as to what I should be looking at in wheel specs to be able to get the 295s to fit without rubbing?