megandjasonkay
SDD Junior Member
- Joined
- Sep 23, 2006
- Messages
- 4
- Reaction score
- 0
After cleaning the EGR and chamber in resides in, Re-installed EGR properly and left it unplugged while starting up. Wanted to blow out any loose build-up before re-attaching the egr wire plug, I noticed an endless stream of white smoke. Is this the build-up just burning up (was alot of build up I removed from the chamber)? I noticed no cooland at the bottom of the chamber when EGR was removed. Should I continue to let it run until it clear (if it will)before re-installing the egr wires? 2nd EGR valve cleaning in 7 days!
05 F-350 6.0L
05 F-350 6.0L