Recent content by odie43

  1. O

    03 6.0 hard starting and stalls

    Same results hot or cold, it started 2 days ago. Hard starts drive a few feet stalls.
  2. O

    03 6.0 hard starting and stalls

    I did a voltage check on the FICM checked good, no DTC's, what else could it be? HPOP, ICP?
  3. O

    Help Needed Ficm?

    2003 6.0 Got the DTC for Loss comm with FICM, truck is in road won't start. What is a good replacement FICM, NAPA Advanced Auto parts, Ford? I have also seen just the power side of the module, what is the best option? I am dead in the water, missing work, need help disabled vet, can't climb up...
  4. O

    FICM Repair

    Do you have a website or phone number? Where in TX?
  5. O

    Help Needed Idle surge

    My 03 6.0 F350 is idle surging at stops, I have to have a firm footing on the brake to control it. Doesn't do it all the time, I have searched the forums and come up with an ICP sensor which I gather is an idle controller and also found there was a re-flash from Ford issued...any other ideas...
  6. O

    air lift

    I have the front bags on my 03 F350 CC 4x4, it raises up to 3 inches, I don't have the compressor system, I fill the bags to about 70 PSI and check once a month, usaully don't need any servicing. I did for the same reason you want to ...RV. It looks great and level either loaded or unloaded.
  7. O

    Broken wheel lock

    Thanks to all for the input, I got the socket of with a slide hammere and vise grips,and took a chisel and elbow grease to get the broken lock off. I have some gauges and chisel marks in my wheel and need to replace a stud.
  8. O

    Broken wheel lock

    How did you attach the slide hammer? It's an excellent idea!!
  9. O

    Broken wheel lock

    The socket is the problem right now, I am thinking of drilling the stud off
  10. O

    Broken wheel lock

    No room for a nut splitter
  11. O

    Broken wheel lock

    The socket is stuck on the busted wheel lock
  12. O

    Broken wheel lock

    I used a 12 point and it is stuck on the broken wheel lock. I have tried to remove he socket, no luck
  13. O

    Broken wheel lock

    Guys I need help! I have a broken wheel lock, I tried the socket and hammer method. Take a socket the fits tight over the wheel lock. Now the socket is stuck on the wheel lock and just spins. I have the socket nearly split in half, it is stuck in the lug hole and I am out of ideas. I have...
  14. O

    Hello from OK

    Just a new guy... I work for the Air Force at Altus AFB, OK. C-17 Dedicated Crew chief. New to Powerstrokes, I had a F250 with the 5.4 gasser before my 6.0. I do all my own maintenance, so I am in learning curve with the 6.0. I have learned a lot so far from the site, cleaned my EGR...
See more

Members online

No members online now.
Total: 151 (members: 1, guests: 150)

Forum statistics

Threads
30,513
Messages
266,063
Members
14,626
Latest member
jarrburg

Latest posts

Top