Search results

  1. O

    No 4x4 light?

    Heh, none more here in VA me thinks...I think it'll be the last of the year:(
  2. O

    No 4x4 light?

    My first instinct...unplugged connector.
  3. O

    early 99 hub assembly

    I have a big block in the rear from the factory, I think it's 3"+ and mine sits level. WTT/WTS: 99 F250 7.3 4x4 many mods..what do you have? - Corral Forums Here's my truck on 33x12.50r16.5 Jesse
  4. O

    Leaf spring separating pads?

    Sounds like a good fallback plan. Mine are completely gone and have been for some time now. Jesse
  5. O

    Water in Fuel light?

    I did a 14 page search and came up with nothing. After installing a TSperformance chip, the water in fuel light came on immediately (I had filled up at my normal station 5 miles earlier). I drove it around a bit and it didn't go off. I pulled the filter and found no water, I drained it anyway...
  6. O

    Leaf spring separating pads?

    I need a part number for the pads between the individual leaf springs of my 99. Ford found them but says they arn't serviceable...anyone know better? Jesse
  7. O

    No 4x4 light?

    10a fuse under dash is fine, 30a fuse under hood is fine. I take it back, I don't hear any noises when I flip the switch on the dash. I hit the switch and flipped it back and forth several times to no avail. I tapped what I thought to be the ESOF relays #1 and #2. If they are the ones...
  8. O

    Hot long start

    7.3L Powerstroke IPR Valve Reseal Kit Is this what comes in the International kit? Jesse
  9. O

    Hot long start

    Does it only take one packet or will I need more than one? Should I R&R or replace while out? Or replace the solenoid? New Page 0 is a link I found about removal and R&R. Jesse
  10. O

    No 4x4 light?

    I go out in the snow this morning, haven't been in 4x4 since last winter, try to engage and nothing happens. I hear a solenoid click under the dash but no 4x4 light in lo or hi plus no 4x4. Maybe the connector came loose from the transfer case...but now way I'm crawling under there to find...
  11. O

    problem with cargo and interior light!!!

    Mine has also done this when the passenger door sensor was stuck or malfunctioning. I sprayed some WD40 into the hole that the sliding rod goes into (not sure what the name is) and it freed up the switch. Jesse
  12. O

    early 99 hub assembly

    Make sure you pay attention to how you put the balljoints go back in, one has to go in before the other...I think it's the bottom goes in first. Jesse
  13. O

    early 99 hub assembly

    OK, if you got later 99 hubs you need to make sure the rotors you got is also for 99+ because the hat depth is different between early and late. Also, Advance Auto parts has them the cheapest at about $270 as of last year when I did mine. Make sure the ball joints are greasable. As for...
  14. O

    Hot long start

    It seems as if my truck takes longer to start when warm than it does if it sits (not cold, but normal weather). Before orings it took 1.2 seconds (according to Advance Auto's scanner) and sometimes takes a tad longer (seems like forever when it's cranking. Also seems like it takes longer than...
  15. O

    Online workshop manual?

    Yeah, mine links to the dieselgarage in the 6.0 tuner section...wierd, I guess someone might have caught on.
  16. O

    Online workshop manual?

    That's odd, I know for a fact that someone has posted a link on here and I've used it to diagnose trans problems. It had the step by step tear down and rebuild of the trans with all the part numbers and tools required as well as every diagnostic step to go through and procedure that symptom...
  17. O

    Rebuilding differential

    Yes, SRW Sterling 10.5
  18. O

    Online workshop manual?

    I used to have a bookmark to an online Ford workshop manual, but now it is linked to some random thread...does anyone happen to have the correct link for it? I'm trying to diagnose a long hot start issue. Thanks, Jesse
  19. O

    Rebuilding differential

    Guess I forgot about this, and it's time...
  20. O

    Finally replaced the glow plugs...almost

    It actually seems like it takes longer to start if I shut it down to run in the store and come back in a few minutes then if I leave it shut down for a couple hours... Jesse
  21. O

    Finally replaced the glow plugs...almost

    It just seems to take too long compared to other 7.3's out there. I've also noticed that it seems to lose power and make noise up higher in the rpm's...also could be a problem in the HPO department so I'd like to try some diagnostics to hopefully prove me wrong. I've read somewhere (but I...
  22. O

    Finally replaced the glow plugs...almost

    Well I changed the rest of them out and behold...all glow plugs on this truck were not working at all. I thought I was testing them wrong until I tested them on the new plugs and I got a reading. Found out my number one injector has been replaced. I also noticed that there was paint/marking...
  23. O

    Block heater plug?

    No wire coming out, just the plug. If I take the plug out will the wire be in there? Will I dump oil or coolant everywhere? So I will have to buy the just the cord or I have to buy the heater too? I thought the heater was built into the engine?
  24. O

    Block heater plug?

    Just looked on another truck and traced it back...it plugs in just above the filter boss, any ideas?
  25. O

    So you think you're a bad ass??

    Holy sweetness batman!

Members online

Total: 93 (members: 2, guests: 91)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top