Search results

  1. Dieselpwrdredneck

    Question 2001 F250 Horn Doesn't Work

    i've notice also thats a bad spot, could you possibly wire in a new horn off the old wire and relocate it to a more convienent spot
  2. Dieselpwrdredneck

    Big Drop in Fuel Mileage

    x2 on frozen rotors, i love 'em
  3. Dieselpwrdredneck

    Big Drop in Fuel Mileage

    If they are hanging up the drag would require more power to move the truck more power=more fuel it would be somewhere for ya to start
  4. Dieselpwrdredneck

    Question Oil pan replacement

    well if ya have the money, and if it needs it GP's, injectors or injector o-rings, turbo o-rings anything that you can think of that would be a bear to get at while its in the truck. a good cleaning and paint job?
  5. Dieselpwrdredneck

    2001 E-350 Very sluggish until warm

    will definatly check that, wired mine on my truck to an exhaust brake a long time ago so i dont deal with that much, kinda forgot about that dragin so much power
  6. Dieselpwrdredneck

    2001 E-350 Very sluggish until warm

    2001 E-350 is very sluggish until its up to operating temps. I'm sure the GP's need replaced, and a cold buzz test indicates some weak injectors, but they seem to buzz better when its warm. Its hard to even drive until it warms up, even with warmer outside temps. I've never seen a psd act...
  7. Dieselpwrdredneck

    wheels for a 2001 f350 dually need

    if i ever have to replace the wheels on my dually i would find a good set of steels. I have had bad luck with my aluminums between the bad oxidation and the cracks
  8. Dieselpwrdredneck

    F-150 help

    correct- Coil On Plug each cylinder has a coil the bolts right on top of the spark plug
  9. Dieselpwrdredneck

    F-150 help

    Just finally got the truck back today, he had a heck of a time with it turns out the plugs have actually never been changed so he did that. After his $20,000 scan tool found nothing, he had a friend of his at the local ford garage hook it up to a ford scan tool and nothing so then he looked at...
  10. Dieselpwrdredneck

    new member

    check to see if there was recall for a wire harness my 99 had one, not sure what problem was they were having tho? and welcome to the site
  11. Dieselpwrdredneck

    power door

    found this but havent done it yet, havent had the time
  12. Dieselpwrdredneck

    This is amazing!!!!

    http://charityexcavatorchallenge.com/index.htm Tha most amazing thing is they actually started it in the one video
  13. Dieselpwrdredneck

    2001 trans. temps.

    posting for a buddy. He has a 2001 slosh box, has an external spin on filter. he says it runs 190* with no trailer runnin down the road. also the cooler lines run through the radiator and the stock cooler. that seems high to me he!! changed fluid, both filters not much change. he is goin to...
  14. Dieselpwrdredneck

    dropin voltage at start ? HELP !

    check the alternator with a multimeter. should be 14 ish when its charging correctly. let us know what ya get and we can go from there
  15. Dieselpwrdredneck

    F-150 help

    no plug wires they are COP, think im gunna take it to a local garage, i just dont know much bout theses gas engines, and woould hat to keep throwin money at it with new parts that arent the problem
  16. Dieselpwrdredneck

    F-150 help

    ya were just replaced no that long ago less than 5000 miles i would say
  17. Dieselpwrdredneck

    F-150 help

    My girlfriends 05 kingranch with the 5.4 started to get a miss only in OD at slow speeds when you start to accelerate. If you acclerate fast it stops, doesnt do it at idle or free reving. hooked up the auto enginuity, said a couple cylinders were missfiring, number 8 more than others. Read that...
  18. Dieselpwrdredneck

    White smoke when starting in cold.

    sounds more like glow plugs to me, have you ever changed them?
  19. Dieselpwrdredneck

    4R100 TC Lockup Mod Opinions?

    ya, you can feel a differecne
  20. Dieselpwrdredneck

    4R100 TC Lockup Mod Opinions?

    I did it on my truck, it works to an extent, just dont go crazy braking at high speeds or the pressure will over power the exh. vavle springs and bad stuff will happen haha
  21. Dieselpwrdredneck

    New up pipes,turbo, wastegate controller and problems

    very curious to see how you like that setup, only half the price of some of the other regulated return systems out there
  22. Dieselpwrdredneck

    F250 rumble at 60mph

    are ya positive it is coming from the rear check front wheel bearings, especially the needle bearings around the axle
  23. Dieselpwrdredneck

    vibration at 65mph

    check your carrier bearing
  24. Dieselpwrdredneck

    What do you do?

    have been an equipment mech., heavy equip. operator, currently i build die sets that go in presses to make pop cans, beer cans or any other type of food or beverage pakaged in aluminum or tin
  25. Dieselpwrdredneck

    Going back to school

    heard Wyo Tech is supposed to be pretty good

Members online

No members online now.
Total: 60 (members: 1, guests: 59)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top