Search results

  1. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    I just tried a cranking test, and was unable to find a way to get an hpop value. Unfortunately I didn't write down the values for the sync and cam and crank position values and as soon as I disconnected the conputer I lost the whole screen. I believe most of the values were a 1. What does a 1...
  2. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    None of those values are cranking, they are all key on engine off. When it was chugging it was giving off a light blue smoke. Not at all uncommon for this truck when cold. I'll try to do a cranking test tomorrow morning. If I remember right, the program has about 6 different windows, which have...
  3. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    Try this http://turbodieselforums.com/downloads/6.0L%20FICM%20Guide.pdf
  4. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    This is what I was reading http://www.fordtechservice.dealercon...FICM_Guide.pdf
  5. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    I was reading a Ford tech article that said sync should be yes, except they indicated "when the engine is running". Mine isn't running . Does that make a difference?
  6. walter.dreyer

    Help Needed Won't start. Using auto enginuity

    2003 6.0 won't start. I ran my auto enginuity. The first time I've used it. I'm not sure what it's telling me. So here's what I believe is the pertinent info. Basically anything that had a red bar graph.FICM Main power,47.5, Min 40 Max 52 95%. FICM information for sync Value:no, Min. 0, Max 1...
  7. walter.dreyer

    Question Hard to start & rough ideling when cold.

    I had a similar problem with my 2003 6.0, only now it won't start. 2 mornings in a row, hard to start, runs very rough, low power. But once warmed up, she ran fine. Now she cranks, and tries to catch but can't. Any ideas?
  8. walter.dreyer

    OEM Bed Extender

    I just received an OEM bed extender. It doesn't come with the factory bed mounting hardware. I seem to remember reading a post of a supplier for the parts at reasonable pricing, but I can't find the post now. Does anyone remember this?
  9. walter.dreyer

    Help Needed Right hub won't engage

    The right front hub won't engage in Auto. The truck is making 14 inches Hg. I used my vacuum pump to apply up to 25 inches HG hub still wont engage. I can put it into lock manually just fine. The hub holds vacuum. I recently did the ball joints on this truck, and subsequently had to replace all...
  10. walter.dreyer

    Where do I tap in for my HPOP gage

    It's a Dipricol unit, I bought from ITP, and I know there a bunch of guys here that have bought it as well. I was hoping for some pics of where to find it. If I get no response I guess I'll have to call ITP for help.
  11. walter.dreyer

    Where do I tap in for my HPOP gage

    I have an '03 6.0 and ordered the HPOP gage? I already have a fuel pressure gage. I can't figure out where to use the ITP pigtail to connect the HPOP gage. The instructions don't say where to find it. And neither does my Chilton manual. Thanks.
  12. walter.dreyer

    cross reference for airdog FF

    I guess this means I'll have to keep one in the truck?
  13. walter.dreyer

    cross reference for airdog FF

    I recently bought an AirDog fuel preporator, primarily since the filters are much cheaper than the Ford units. Hopefully the OEM filters will last MUCH longer. The only problem is, I haven't been able to find a cross reference for the FF-100 Filter that came with the kit. Can someone tell me the...
  14. walter.dreyer

    Can I do this?

    The reason you may have seen a mileage increase, is due to the solvent factor of bio-d, cleaning your fuel system, Thereby giving a better spray pattern in the cylinder.
  15. walter.dreyer

    Bed extender

    Groundhawg, was that from Ford? I had compared one from an F150, and it was 6" to short. That's why I was wondering if they are adjustable. I prefer the OEM piece because of its ability to flip back and forth, ( I have a tonneau cover and don't want to lift it every time I puy something in)and...
  16. walter.dreyer

    Bed extender

    Does any body know if the oem bed extender is adjustable in size. I was on westin's site and looking at their assembly instructions, when I noticed there might be some adjustability. There are a lot of bed extenders off of F 150s around but few from F250s. So I was wondering if I could buy one...
  17. walter.dreyer

    Surging ? Help!

    I'll make sure I do that if it happens again. However, the RPMs were noticeably rising and falling, to the extent that my wife even noticed, and she asked me what was going on. Once I got in and started driving down the road everything was fine.
  18. walter.dreyer

    "03 6.0 won't start

    Yeah, that's why I have mixed thoughts on this whole go around. On one hand I got hosed on the batt. install, but on the other hand, I got almost a whole new fuel system out of it.
  19. walter.dreyer

    "03 6.0 won't start

    I wish I had thought to ask for the old parts. The truck seems to be fine now. Everything was warranty work except the batteries of course. I didn't mind paying for the batteries. $99 each, 100 month warranty. What P****d me off was the $67 installation charge.The batteries were 5 years old, but...
  20. walter.dreyer

    Surging ? Help!

    Actually it only did it that morning.Yes, it was warming up, and once I started driving it didn't do it any more. I don't know what the RPM jump was since I was in the house while it warmed. Could air still in the fuel system, have been what was causing it. I only live about 5 miles from the...
  21. walter.dreyer

    Surging ? Help!

    Got the truck back from the stealer yesterday, everything semed to be fine. Started the truck up this morning, was five degrees outside. I have powerservice in the tank, and the truck was plugged in all night. While it was warming up the missus and I both noticed it was surging. Now I've read...
  22. walter.dreyer

    "03 6.0 won't start

    The continuing saga. All the parts didn't arrive on Sat. so they said I should have it back on Mon. I called in the evening on Mon. and they said the parts arrived late, so the truck isn't finished. I called late on Tue. then they say that the HPOP is bad and they need to order it. I just...
  23. walter.dreyer

    Anyone have this happen??

    I have seen some alarm systems that flash the brake lights, both when in alarm or when in autostart mode, so the brake light portion again could be pointing to the alarm.Several of my coworkers including myself have viper autostarts, they are all set up slightly different. Apparently whether you...
  24. walter.dreyer

    What is the best code reader?

    Are you refering to the same thing Bush is? Something that I like or don't like about a scanner I can deal with. I would like to spend the least amount of cash I can, only once. I don't want to realize a year down the road that the scanner I bought won't tell me what I need to know, and now I...
  25. walter.dreyer

    "03 6.0 won't start

    Thanks to all, I sent her to the dealer. Dealer at first said she needed two new batteries, as the engine supposedly won't turn over fast enough to start. When I told them that the truck was running and then died, and subsequently would momentarily fire they agreed, something else was wrong, but...

Members online

Total: 73 (members: 2, guests: 71)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top