Search results

  1. ponyexpress94

    Watch out for crazy 18 wheelers...

    Sorry to see all your hard work get so messed up. Glad you are OK. Will the truck be repaired or is it going to diesel heaven? What exactly were the events surrounding the accident?
  2. ponyexpress94

    Back Spacing

    I assume you mean what tire will fit, but without listing a tire size that you're shooting for and whether you have lift or it not makes it kind of hard to pin down the info you need. Tire size may dictate your wheel backspace, and 99-04 trucks have different suspensions than the 05-08 trucks...
  3. ponyexpress94

    6.0 Liter CCV Mod

    You're right, that installation couldn't be any cleaner. How does that filter drain the oil that is collected from the air flow? Does it drain directly back to the valve cover of the engine, or do you have to manually drain the housing every so often? It's too bad Racor doesn't have a ready...
  4. ponyexpress94

    6.0 Liter CCV Mod

    Do you have a link for the Racor filter?
  5. ponyexpress94

    6.0 Liter CCV Mod

    I was over on The Diesel Stop wandering around and noticed alot of CCV Modification discussions for the 6.0 and 7.3. I know the oil eats away at the boots and that changing the boots to something like DieselSite sells cures the oil deterioration issue. There is also a brace to keep the pipe...
  6. ponyexpress94

    Help Needed 06 superduty front axle hop

    I've never done a pulling event, but I am wondering if your issue is coming from not having enough weight on the front end of the truck to keep the tires planted and the suspension isn't staying compressed enough to prevent the truck from bouncing. It seems like a good place to start with some...
  7. ponyexpress94

    Whatever happened to Diesel of the Month?

    I like the proposal of staff being nominated since the votes are there to be seen by everyone which prevents any voting anomalies. The Diesel of the Month with a Diesel of the Year is an awesome format. The little avatar logo for the monthly winner is cool too, and there could be a prize of...
  8. ponyexpress94

    Do I need a Massachusetts CDL?

    What is the Gross Vehicle Weight (GVW) Rating of the truck? Do you intend to pull a trailer behind this truck and if so what is the GVW of the trailer? This will help answer your question.
  9. ponyexpress94

    Auxiliary Idle Controller

    Thanks, Crumm. That really spells it out for my truck. One question though, if I want to do the Battery Charge Protection Switch as well, what is the color of the wire under the dash that I need to supply 12 volts to?
  10. ponyexpress94

    Auxiliary Idle Controller

    The truck is a 2003 6.0 (February 03 Production).
  11. ponyexpress94

    Auxiliary Idle Controller

    Does anyone know how or where I might be able to locate an Auxiliary Idle Controller? Does Ford still make them for the new trucks. I have checked ebay with no success as well as the Bob Utter Ford Parts web site. Thanks in advance for any help.
  12. ponyexpress94

    Big Long Bed I Guess

    If you don't want to cut and shorten the chassis frame rails, then just set the truck bed over the frame and center the wheels in the existing dually fenders. Then you just need to decide how you will make up the difference between the back of the cab and the front of the bed. You should have...
  13. ponyexpress94

    Big Rig Wheel Kits

    The 08's didn't have an option per say...the 08 F450 pickup is built with the same axles as the 450/550 chassis cabs. I don't know enough about the 99-04 450/550 axles to know if the later 05-08 steering knuckles, hubs would swap and then you would still have to find a newer rear axle as well...
  14. ponyexpress94

    Big Long Bed I Guess

    I'm pretty sure starting in 99 the 450's, 550's and all Chassis cab 350's had flat frame rails from the back of the cab back to the end of the frame unlike pickups which have a "kick up" over the axle on their frames. Additionally, your truck has a chassis cab industry standard 60" CA (Cab to...
  15. ponyexpress94

    Big Rig Wheel Kits

    I learned something new today...thanks Big Rooster. Hostile Wes...you are going to have to physically measure your bolt pattern so you have some info when you contact vendors, because I believe the adapter you found is for F250/350 wheels to big rig wheels. There may not be much out there...
  16. ponyexpress94

    Big Rig Wheel Kits

    Not sure I follow you on this one?
  17. ponyexpress94

    2006 King Ranch Thing

    Yeah it is a hook. Ford put it there so you could hang stuff off of it like a small bag for trash etc. I have never used it and have never really come up with anything that it could be used for. I don't know exactly when it was changed but I believe there was an ashtray there before the hook...
  18. ponyexpress94

    Big Rig Wheel Kits

    If I am understanding your description correctly of the adapter you have found then unfortunately it will not work. The 450/550 has a 10 lug hub versus the 250/350. Additionally the 10 lug 450/550 hub is smaller than the 10 lug hubs used on the big rig trucks. The adapter you found is for...
  19. ponyexpress94

    Wannabe 6.0 gauge whore...

    thanks for the help treyloco. Does anyone have suggestions for the oil pressure and oil temperature senders?
  20. ponyexpress94

    Wannabe 6.0 gauge whore...

    As the title implies I am looking into putting gauges in my 03 6.0L and I am looking for input on where to hook up some of the sensors. My wish list of gauges: Oil Pressure Oil Temperature Water Temperature Fuel Pressure Boost EGT (Pre and Post Turbo?) Trans Temp I have located one...
  21. ponyexpress94

    New Member Introduction

    Hey guys, just wanted to introduce myself to the members on the forum. My name is Patrick and I am a die hard Ford Truck fanatic. I've wanted a Super Duty Diesel for the past six years and finally got one early this year. The truck is a White F-350 XLT Crew Cab Long Bed 4x4 with a Tan Cloth...
View older results

Staff online

Members online

Total: 123 (members: 2, guests: 121)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top