Search results

  1. K

    Transmission fluid and longevity

    I have over 213K on my "X" with AMSOIL ATF. When the "X" was @ 100K I had the oil sampled and ATF was still good for continued use. When I reached 150K I decided to change the ATF with another new batch of AMSOIL ATF. My goal is over 300K on original drive-train Ken
  2. K

    Power window has stopped working?

    Thanks, looks like I will take to local service shop good guy
  3. K

    Power window has stopped working?

    Thanks for the reply. In my case I do not have another switch. This is the drivers window Thanks Ken
  4. K

    Power window has stopped working?

    Today my driver door power window just stopped (Up position). I never noticed any delays in window speed and this is the original motor. My question does window motor has a separate inline fuse? Where located? Thanks for any help or suggestion Ken
  5. K

    Another new site sponsor!

    Welcome, and a very nice product line.
  6. K

    Milwaukee 18V Batteries

    The batteries question, do you always have batteries on charge? Or do you only recharge before you need tool? I think if always on charge you shorten battery life. I found this out with another tool. Just my 2 cents
  7. K

    PICS: Valentine One <custom install>

    Nice installation
  8. K

    Synthetic in tcase

    AMSOIL ATF in transfer case since first 5K miles. Just changed a few month back with 200K on "X". No problems
  9. K

    Radiator Hoses what is life range

    Thanks
  10. K

    Radiator Hoses what is life range

    My hoses are 6 1/2 years old with over 204K and still look good and feel good. When are others changing hoses? Some years ago all hoses were changed about every 2 ~ 3 years. Thanks for replies Ken
  11. K

    Road trip MPG

    The last 4K miles I have been getting 17+, for the pass 204K miles I have averaged 15.34 mpg.
  12. K

    Which Synthetic oil??

    My last Oil Analyzers report on sample date 11/10/06 soot 1.0% 02/01/06 <1.0%
  13. K

    Which Synthetic oil??

    I think if you look up the oil HDD Series 300 5W - 30 or look up BY PASS filters systems for our engines you would have a better understanding of extended drains. The oil is designed to be used in extended drains. Sometime back during the first 100K I logged every added qt of oil and recorded...
  14. K

    Which Synthetic oil??

    That is correct over 200K with just two oil changes. During the first 100K I changed full flow filter every 10K and By Pass filter every 30 ~ 40K. I send in samples of oil every 10K Now after the first 100K I started to change full flow filter every 10K and BY Pass every 20K and sample oil...
  15. K

    Which Synthetic oil??

    I run AMSOIL Series 300 HD 5W-30 oil with a BY PASS filters system. Truck (X) has over 202K on engine with two oil changes. Look at a BY PASS filter system. FYI 202K MPG average is 15.3.
  16. K

    Amsoil ATF

    200K w/o any problems
  17. K

    Mileage on other 7.3's??

    With a 200K miles average of 15.4 MPG. that is over 6 years that includes towing, idling, 4 wheel all driving conditions. Most on the time in last two years I stay around 17 MPG +/- Ken
  18. K

    What was your very FIRST car?

    This is my second reply for some reason first reply did not stay on site. I have enjoyed the replies of first cars. My first car was a 1957 Ford 4 door Custon 300 with 292and three on the tree. Also radoe and heater, plus vacuum wiper. At the time (1962-64) love the car. Bestto all
  19. K

    Ink Stain

    Hair spray removed ink off of doop panel but not off of arm rest. Will try a WD 40 tomorrow. Thanks to ALL Ken
  20. K

    Ink Stain

    Thanks will try
  21. K

    Ink Stain

    Well after 6 years and 200K miles have a problem. My oldest granddaughter used a ball point ink pen on rear door arm rest. What is best method to clean??? Thanks for any reply Ken
  22. K

    Hub Problem after Ball Joints Replaced

    THANK YOU FOR THE INFORMATION. Ken
  23. K

    Hub Problem after Ball Joints Replaced

    Thank You very much for the reply Ken
  24. K

    Hub Problem after Ball Joints Replaced

    To my knowledge no seals were repleced on the Hubs. Thank you for the reply. Now my question would be clean hubs and replace seal? Would this solve problem? Thanks Ken
  25. K

    Hub Problem after Ball Joints Replaced

    A few months back I had the OEM Ball Joints replaced @190K this weekend I needed my 4 wheel drive but it would never lock into 4 wheel. I went to the local shop for them to check truck. They think all that needed is to clean hubs and normal PM. They also claim the hubs " DO NOT NEED VACUUM"...

Members online

Total: 87 (members: 3, guests: 84)

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79

Latest posts

Top