Search results

  1. dieseldork

    fuel pressure?

    Thanks guys thats awsome info.I'll be doing the mod this weekend, I'll let you know how everything works out.
  2. dieseldork

    fuel pressure?

    Ok so i've read the how to article on shimming the fuel pressure spring to 70psi,. But my question is doesn't a programer boost fuel as well? Maybe i'm not getting it, but im sure SDD will set me straight.:confused:
  3. dieseldork

    help....wire thats burnt....

    Right on the money, Once again SDD.com comes through. All you guys are really cool to take the time and answer questions for the less expirienced. Mike
  4. dieseldork

    help....wire thats burnt....

    So now I have two different wires that are not connected. GREAT......the butterfly on the ebpv is still intact. I still have one more question for you though. there s a plug in the "Y" pipe that you have disconnected, I know that a dodge drain plug to plug it, but what do you do with the wires...
  5. dieseldork

    help....wire thats burnt....

    The EBPV is still there and working. Another member had mentioned a water in fuel light sensor. ???? I need to get another pigtail from the dealer so I need to know what the darn thing is called. Thanks again for the help White buffalo..
  6. dieseldork

    help....wire thats burnt....

    I will take pics right now and maybe that willgive you a better idea of the situation.
  7. dieseldork

    help....wire thats burnt....

    Thanks for the reply. If this is the water in filter plug would it cause the light to come on?
  8. dieseldork

    help....wire thats burnt....

    I'm doing a banks quik turbo housing and when I removed the "y" pipe where the IC pipes come in I noticed a wire connecter from the fuel filter to the base of the turbo is missing and the wire is in the valley of the top of the motor. the connectors are still connected but the wire is off, what...
  9. dieseldork

    Rear end vibration?

    Make sure the block "if intstalled" is pointed in the right direction, theshorter side should face forward, it is possible that you will have shim the carrrier bearing, the driveline should be straight from the trans or transfercase.
  10. dieseldork

    egt at shutdown

    Pre turbo
  11. dieseldork

    egt at shutdown

    What should the egt temp go down to when shutting down to be safe? I was told anything below 300. whatcha think?
  12. dieseldork

    need help

    My truck is a 2001 f250 4x4 psd
  13. dieseldork

    re- tikiwiki speedo recalibration

    Thanks for helping me out with that. Mike
  14. dieseldork

    re- tikiwiki speedo recalibration

    Does this mod work only on certain years? The instructions say to use the reset button to access the factory codes, my 2001psd has a non didgital odo. is there somthing im missing in the how to? has anyone done this with similar setup?
  15. dieseldork

    need help

    thanks I checked a few trailer supplies with no luck, maybe its as easy as an auto parts store. Mike
  16. dieseldork

    need help

    My truck was missing the factory 7 way plug at the rear bumper, and the harness to go to the factory harness, any thought or ideas? I know it would be to easy to just snip the wires at the plug and hard wire to a new 7 way but I just want the factory style plug and go. Thanks Mike
  17. dieseldork

    New guy

    new to diesels Well I finally did it, I bought myself a diesel. Afterputting up with a gas motor forever. New truck is a 2001 f-250 4wd 7.3 auto. 90.000 miles. it tows the new trailer like a dream. Old truck would struggle up the pass, 2nd gear 4800 rpms, 7.3 does it in style, 65 mph. I have...
  18. dieseldork

    New guy

    Just got a 01 7.3. thought I would see what this sites all about, Interested in some DIY items I've read about. Also I have a superchips 1705, Banks monster exhaust and drop in K&N filter, some feedback on those mods would be cool. Mike

Members online

No members online now.

Forum statistics

Threads
30,565
Messages
266,218
Members
14,690
Latest member
Daddydirt79
Top