Search results

  1. P

    Stacking Edge with Attitude

    Now see that is what I thought also. I called Edge directly today and spoke with a tech guy and he told me differently. According to him the Juice is a module and CAN be stacked with a progranner such as the Evolution, PowerPup and so on. He also said it can be stacked with the EZ module...
  2. P

    Stacking Edge with Attitude

    Have any of you ever stacked the Juice with Attitude with a programmer such as BullyDog Power Pup?? If so then what was the gains you seen?? Thanks
  3. P

    DT466 Turbo??

    I guess I should have specified that when I get the $$$ this turbo will be going on along with Stage 3's and a Stealth system. Prolly will even add some Nitrous to the mix. Guess I will see just how much boost the stock head bolts and gaskets will take. Thanks
  4. P

    DT466 Turbo??

    I guess no one knows anything about this turbo or what it will do??
  5. P

    DT466 Turbo??

    Done some research and it is a GT40 turbo. Compressor housing is A/R .58 and turbine housing is A/R 1.06 The closest thing I can find is: http://cgi.ebay.com/ebaymotors/GARRETT-GT40-TURBO-750-HP_W0QQcmdZViewItemQQcategoryZ33742QQihZ013QQitemZ230025504592QQrdZ1QQsspagenameZWDVW Only...
  6. P

    DT466 Turbo??

    Bought a 3-4 month old turbo off a DT466 today from a friend. The engine had blowed so they decided to retire the truck. Had to give him a wopping $100.00 for it and I think that was cheap enough even if I don't ever use it. So now I am wondering what I bought and will it be any good on my...
  7. P

    Need a Little Knowledge

    Well truck pulled a load of boats to Alabama today and is on its way back home as I type. So fare around 700 miles this trip and no stumbles or snags yet. We will pull the oil filter tomorrow and see if there is anymore metal debris in it.
  8. P

    Need a Little Knowledge

    Well while doing some diagnostic work and checking ICP pressure the truck started after getting all the air out of the high pressure system from them changing IPR. Not sure why the said the pressure was low and would not start but it fired up and purred like a kitten. This thing runs like...
  9. P

    Need a Little Knowledge

    Sorry, not ment to have a 'tude. Just came out that way I guess.
  10. P

    Need a Little Knowledge

    Well if he had a warranty then I would not be on here asking for some help. The truck has WELL OVER 100,000 miles on it. So lets hear what you all think the deal is??? Thanks
  11. P

    Need a Little Knowledge

    Ok guys I got a good one for yeah and I need some help as to what you all think the problem could be. A couple weeks ago a buddy was driving driving down the road in his 04 6.0 PSD and it died just like you turned the ket off. So he had it hauled to the local Ford stealership to get it fixed...
  12. P

    WHO'S GOT THE MOST MILES?

    I seen a 99 a couple months back that had almost 800,000 miles on it and they still pulled across country with it every day delivering boats and campers. They told me the only major things they have done is one set of injectors clutches and I believe they also said one turbo.
  13. P

    NEED A 02 7.3l engine

    I was going to give you a number to call there in Houston to a engine reman shop that has excellent prices (Fare less than David Lott) and warranty but hey it sounds like you got everything handled a whole lot cheaper. I bought a truck one time for $500.00 that the people thought was locked...
  14. P

    best way for stacks?

    Talked with Daryl at Diesel Performance Plus couple days ago and I am getting ready to order a 6" kit from them. www.dpppower.com They are the cheapest kits I have seen and is really nice guy to talk to. I would have ordered them the other day but he was stranded in WY or MT some where...
  15. P

    EDM Nozzles??

    Just kinda curious where to get EDM nozzles from? Been told they can be had for around $320.00 a set. Any info on this is greatly appriciated.
  16. P

    SD HPOP

    If you feel like tackling the job then the answer to your question is YES, you can swap the internals of the 15* and 17* SD pumps. We done this with a customers 95 truck that I put bdp stage 1s in last year. The truck now has around 10,000 miles on it and has had no problems. I have...
  17. P

    http://www.diy-injectors.com

    Ok, now lets think about this comment here for just a second, as I think it can be shot down real easy. Bean at bdp has been building injectors for how long now??? As fare as I know bean has been building and selling his injectors with NO flow bench until recently and I am not sure if he has...
  18. P

    Big Oil for under $1000.00

    Does anybody think we will be seeing Big Oil for less than $1000.00 anytime in the near future? :dunno I have been hearing thru the diesel vine that there is currently a Big Oil system being tested that is going to be priced well ubder $1000.00 Is this possible???? I am just curious if...
  19. P

    Converted SD Downpipe

    Looks good highfive. I prefer to fabricate my own mods when I can rather than buy them as this makes me more proud of them when I am finished.
  20. P

    stealth HPOP from BDP

    Thanks for the welcome 94f450sd :thanks Yeah, I will have to say Bean is a AWESOME guy and he will take care of his customers for sure. I give Bean at bdp and the Stealth designer/builder a big :thumbs as they all have worked VERY HARD to give us the oppuritunity to own what I feel is...
  21. P

    twildman

    Tony's tunes are excellent and have been nothing but pleased since I have gotten them.
  22. P

    stealth HPOP from BDP

    I am a newbie here and would just like to so HOWDY all.:usa I would like to say that is a SMOKIN deal Bean is having on the Stealth System :thumbs :thumbs If you have ever thought about BIG oil the Stealth is deffinantly the one to buy and now is a good time to buy one.:sweet :sweet

Members online

No members online now.

Forum statistics

Threads
30,517
Messages
266,071
Members
14,629
Latest member
Colvinecoboost14
Top