Search results

  1. CPUNeck

    Turn signals inop!!!

    When the switches go bad, usually one of the first problems is the flashers... did you check them? They are part of that switch.
  2. CPUNeck

    rear axle anti-sway bar

    I used one off a 96' HD 250. Almost the same, I just had to "slide" the fuel tank over 1/4" for clearance. BIG difference in the handling and the right price... FREE.:D
  3. CPUNeck

    I got the SHAKES!

    How about your driveshaft.., Have you checked to see if you've slung a wieght or something? While we're on the weights, are they all on your new tires :dunno , I once was talked into trying some Daytona's and while they were being balanced I took note the SMALLEST amount of weight needed was...
  4. CPUNeck

    Response from WWW server

    I'm not sure if this is the place for this, but I quite regularly have the server pause, sometimes even lose the connection. :dunno I can't figure wether it's the pipe to the net or perhaps the server. In another life I did IT. :( I have a crappy DSL connection (Alltel monopoly, I'm a Cbeyond...
  5. CPUNeck

    CPS Failure? or not?

    Pardon if I've already posted this :rolleyes: (been busier than a one legged man at a butt kick'in contest! :p ) Check your under hood relays. (I believe 2002 or so, Ford started putting all the fues' in one pannel.) I wasted $$$ on my CPS when I needed a relay. If memory serves me right you...
  6. CPUNeck

    Transmission Fluid Change

    Yep, I got mine instock from NAPA. Probably not as economical as other options. :dunno
  7. CPUNeck

    4X4 question

    When you switch from 2x to 4x I'm certain what you hear is the X-fer case engageing. I doubt you'd hear the hubs over the engine unless you where standing right by them while someone else engage the 4x4. I recommend running in 4x4 on a regular basis (couple times a month) on straight roads...
  8. CPUNeck

    Did some more projects today....

    Daryl, any concerns about the heat that'll be generated with both elements blazing? My OEM headlight enclosures are CRAP -mad Earlier this year I removed them to clean the inside since over time that good ole GA clay finds its way in there, and with just soap and water close to HALF my...
  9. CPUNeck

    4X4 question

    Well with out a bio on your truck I'll assume when you say "switch" you have ESOF. This would mean your hubs actually state Auto and Locked. This is a redundant feature. The auto hubs are actuated by vacuum and have had reliability issues in the past so Ford decided to give us the option of...
  10. CPUNeck

    finally runnin on home brew!

    Crap, just my luck a day late and a dollar short. :cool: Congrats Scott!! :thumbs See, this section is just on the cusp of budding :sweet
  11. CPUNeck

    Tranny Fluid Prices

    Well I can say the by-pass is the pipe "jumpered" between the feed and the return of the tranny fluid. From what I learned from Gregg Evans, he said the fluid kinda "recirculates" until a thermostat like device opens allowing flow past the "jumper" to the coolers. :dunno The reason he and I...
  12. CPUNeck

    Tranny Fluid Prices

    Hmmm.. Do you mean you have a CNC/special machine to put the drain in the T/C, then balance it? May not be a big deal :dunno , just seems it probably was originaly balanced and at the speed it rotates, that may mess up some stuff. Not to mention the potential contamination from metal shavings...
  13. CPUNeck

    Mo guages

    Nope, I'm WAAAAYY to lazy to do that. You'd see while the fat isn't in the fingers, it some how found its way a little further south. :( I used a wrench on the 45 degree fitting and patience (which I have in SHORT supply. ;) )
  14. CPUNeck

    Tranny Fluid Prices

    You can mix them, even though you'd be losing some of the advantage. If I'm not mistaken, you might have a drain plug on your T/C. :sweet Just make sure you have the tool to turn the flywheel and don't try and shadetree it like I did :( You don't even want to know!
  15. CPUNeck

    Mo guages

    Well the magic fitting is a 45 degree 1/8" male - female unit. Biggest PITA is you have to assemble your fittings one piece at a time.. now that is asking for a leak :confused: My fuel gauge is mostly ROCK steady :D that's what happens when your darn gauge is stuffed full of glycerin...
  16. CPUNeck

    Trans Cooler

    Well my guy at Akins Ford here in Winder GA is one cool dude :sweet :sweet I routinely get prices as good if not better than even the internet on stuff. :thumbs :cool:
  17. CPUNeck

    Trans Cooler

    I thought the OEM OAC's were stacked plate :dunno When I did my MonsterBox I went with the V-10 cooler, like $99 if memory serves me right. I have yet to see my tranny break 190F and like 75% of the time it's under 150F. Very impressive as I don't have the OWC on my early 99'. :(
  18. CPUNeck

    More HELP--She's barely running

    Well looks like the solution could be right around the bend. Now I believe it's important to know whether it was "smoking bad" when you rescued your wife or "not". If your UVC starts misbehaving your injectors don't fire, causing a lope but much more noticable after the T/C locks up! But no...
  19. CPUNeck

    ROUGH START AND IDLE

    Hmm.. I'm interested in the slow cranking. Once the temps get to 60 or better here in GA, I don't EVER wait on the light, I just crank like it's a gasser :p and have been doing so since new (Early 99') now at 172k mi :cool: Soooo, because your waiting longer on the WTS light, and perhaps the...
  20. CPUNeck

    Mo guages

    Yep, I've been keepin up on this, even though I have a pressure gauge under hood. It is connected to the very port you speak of on the head (in a way). Just shhhhh, don't let my truck know it's suppose to leak :D You can find a pic of the fittings I used to navigate that tight space. So far...
  21. CPUNeck

    HELP!! She's bleeding out!!

    Man, did you get as nervous as I did leaning over that jinormous fan spinning at (2100rpm for me, AIC :D ) :eek: I'm the guy who had the water pump with over a 1/8" of play (still didn't leak a DROP of coolant). It wasn't pretty scarey watchin that fan even at idle on the front of that water...
  22. CPUNeck

    Front Hidden Hitch Install

    Hmmm... FREE?? :p , I'd bet Tbar might view it as an installment :D T, man that was a cool setup. I can only think of a couple THOUSAND ways I could benifit from that little deal. :thumbs
  23. CPUNeck

    HELP!! She's bleeding out!!

    The HPOP is constantly changing PSI to the injectors. Think of all the variables that could change the rate of "leak" like heat under hood, pulling a load, even being cold. I would push ALL my chips in the kiddy on this one. Sounds like your quick with the wrench, why not try one of the dye kits...
  24. CPUNeck

    HELP!! She's bleeding out!!

    HPOP O-rings Well, sounds to me like classic high pressure O-ring leakage. That is a lot of oil. Try arming yourself with a nice bright flashlight, start the engine, (ensure you don't have any items hanging from your neck/loose clothing), climb over the radiator and take a good look at the...
  25. CPUNeck

    Door Locks???

    I think it's voltage related. Had good detail in previously attempted post, but server dumped that post into the bit bucket. :(

Members online

Total: 226 (members: 1, guests: 225)

Forum statistics

Threads
30,512
Messages
266,061
Members
14,625
Latest member
woodrow58

Latest posts

Top