You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Search results
-
L
06' 6.0 no start hot
No codes and truck is all stock. No tuners or anything.- Lodibob
- Post #7
- Forum: 6.0L PowerStroke Engine & Drivetrain
-
L
06' 6.0 no start hot
I will try new icp tonight after work. I don't think that is it but i am stumped. When cold truck fires right up and idles at about 650-700 psi icp. Then when it warms up idle is between 500-590. Ipr at hot idle is usually around 30% but once in a while it will creep all the way to 84.7% at...- Lodibob
- Post #5
- Forum: 6.0L PowerStroke Engine & Drivetrain
-
L
06' 6.0 no start hot
Truck has a little over 200,000 and i run rotella 15/40. I have air tested at the ipr connection and the icp also. Small leaks can be heard underneath of the oil rails but are hard to pinpoint. I'm thinking about trying a dye in my oil. Any suggestions on that or anything else are greatly...- Lodibob
- Post #4
- Forum: 6.0L PowerStroke Engine & Drivetrain
-
L
My truck has just over 200,000 miles and i have been using rotella 15/40. Nothing seems to make...
My truck has just over 200,000 miles and i have been using rotella 15/40. Nothing seems to make any difference. I have air tested it through the ipr fitting and icp also. Leaks can be heard on both sides under the oil rails but can not pinpoint. Thinking about trying dye in my oil? Suggestions?- Lodibob
- Profile post
-
L
06' 6.0 no start hot
Hello and i thank any and all who respond in advance. My 2006 f250 6.0 has a hot no start. I have done updated stc fitting, stand pipes, dummy plugs, ball tubes, and injector orings top to bottom. Fires up quick when cold but will not climb above 300 psi icp when hot cranking. Ipr goes straight...- Lodibob
- Thread
- Replies: 6
- Forum: 6.0L PowerStroke Engine & Drivetrain