Search results

  1. ward cleaver

    E4OD trouble

    my e4od is having 3-4 shift issues and sometimes taking off in 2nd also.
  2. ward cleaver

    GP Circuit Low Input

    I'm thinking this has something to do with the glow plugs right? What? The relays? P1391 GP Circuit Low Input Bank No. 1 (RH) P1393 GP Circuit Low Input Bank No. 2 (LH)
  3. ward cleaver

    Front brake rotor removal

    My right front rotor is toast. I have the caliper off but the rotor apears to be part of the hub,(the lugbolts are mounted on the hub in front of the rotor). These are auto-hubs. Do I disassemble the hub to get at the rotor? Do I just unbolt the 4 bolts on the inside that face toward the...
  4. ward cleaver

    Question Need info on fuel tank breather upgrade

    I'm trying to do the fuel tank breather upgrade. Does anybody know how to remove the "roll-over valve" on a '97? What can I replace it with to make the tank breath better/fill faster?
  5. ward cleaver

    Adrenaline HPOP bowl question

    Do you have to delete the fuel bowl to install the Adrenaline HPOP? I don't want to if I don't have to... at least for now! (Low budget kinda way right now)
  6. ward cleaver

    Help Needed Is it my TW chip?

    Is it my chip? Pulling my trailer up out of the desert last weekend my truck would surge like the chip was temporarily turning on then off. It did this in the extreme, tow mode and daily driver too. Most of the way it seemed like there wasn't as much difference between the settings as when it...
  7. ward cleaver

    Got my Banks Intercooler, need new transcooler

    I just got my new "Technicooler" intercooler installed at Banks, it really makes a big difference. They had to remove my big aftermarket transmission cooler to fit the intercooler in so I need a new skinier tranny cooler to fit where the stock one was. Any ideas?:confused:
  8. ward cleaver

    Question fuel guage reads way over full

    My fuel guage is reading way over full on either tank. (front tank's empty and back tank's half full. I checked the wire connection at the fuel tank selector valve (looks good).Where else should I look? This sucks when you don't have much fuel in your tank.
  9. ward cleaver

    My add-a-leafs suck

    They are sooo stiff it hurts my eff'd up neck, but I like the ride height. Should I take 'em out and just add steel spacers under the stock leafs for proper lift? Any ideas?
  10. ward cleaver

    Mercon V ATF now ok for OBS E4OD's?

    Go here http://www.imakenews.com/lng/e_article000564317.cfm?x=b11 and read this about using Mercon V in our oldys.
  11. ward cleaver

    Intercooler or Water/Methanol injection?

    My '97 is still gettin high egt's running the grade with my trailer. Which solution is better? Who makes an intercooler for my truck? I'm leaning toward water injection...
  12. ward cleaver

    Noisy HPOP

    My hpop is making alotta racket. is it time to replace it? how do you trouble shoot this little rascal? what can a weak pump cause?
  13. ward cleaver

    HELP!!Oil Spewing Out Rear End of Left Head

    I pulled into my kids music lesson yesterday to find oil flowing out from under my trucks engine near the oil filter,or so I thought. When I inspected it using a mirror at home it's coming from a 2" plug with a square hole in it on the firewall end of my left head. Anybody know what this plug...
  14. ward cleaver

    High Pressure Oil Crossover Hose kit?

    Anybody have one of these kits from "pure diesel power" installed? any problems with it? :silly
  15. ward cleaver

    Boost gauge/regulator?

    I want to install the regulator/map fooler and also my "T" for my boost gauge. Do I just install the "T" for the boost gauge ahead(pressure side) of the regulator/fooler?
  16. ward cleaver

    Turbo noise / rattle...

    I think my turbo is rattling/making noise (sounds like a bad wheel bearing under the hood from inside the cab). Where do I get a re-build kit from? Do I need a new wheel too?
  17. ward cleaver

    HPOP ?

    I installed Tony Wildman's chip in my truck and it lights up like ze skyrocket, but the c.e.light comes on. Tony says it's likely the hpop not keeping up. _______ What year would I look for at the junkyard? I Found these HPOPS below at Delphi. Which is the one that'll fit my 97...
  18. ward cleaver

    air helper bags for rear towing help

    I am towing a 5th wheeler. What size air bags do I need?:burnit
  19. ward cleaver

    Which performance chip is better?

    I have a 97 4x4 7.3L powerstroke with K&N air filter and a bullydog 3" down-pipe + cat "test pipe". Which chip is better for performance/safer (lowest egt's), Edge EZ or Bully Dog 6-Position 4-Bank Chip for Ford Powerstroke? I tow a 30' 5th wheel toybox 14,000lbs gvw.

Members online

Total: 91 (members: 1, guests: 90)

Forum statistics

Threads
30,516
Messages
266,069
Members
14,627
Latest member
castellscl

Latest posts

Top