Search results

  1. Guinness

    Question Dana 60 High pinion (reverse) or regular?

    What does my 1999 f350 drw have under the front? the dana tag says 610655-1 which means its 3.73 and housing says std, which I am assuming is standard, is this where it would say its reverse or high pinion? Im getting ready to order some rings and pinions in 4.56 and 4.63(rear) all they make...
  2. Guinness

    flexpate problems threaten labor day vacation..

    New trans, torque converter, ats flexplate, cooler and lines installed. It went together much better with the proper dowels. Next I need new gearing, its a pig (no tuner)
  3. Guinness

    flexpate problems threaten labor day vacation..

    This time the dealer was able to get me the proper dowels, they are like 3 inches long for the automatic trans. Withe truck being at one time manual - am betting the pcm is also a manual since the trans always shifted like crap too.is there a way to tell ?
  4. Guinness

    2000 f350 oil leak!

    Sounds like dipstick bung on the oil pan, I just fixed this on mine with rtv by baking the nut off and carefully gooping it around the bung retighten the nut and wipe off excessthere is a more permanent repair if you replace the oring inside the pan but its a lot more difficult,
  5. Guinness

    flexpate problems threaten labor day vacation..

    Does anyone know what the proper dowels look like on the automatics? Mine don't come all the way through the horsecollar on the back of the engine and I assume they should. Am I right in thinking the shorter ones are for a m$anual trans?
  6. Guinness

    flexpate problems threaten labor day vacation..

    Turns out i have too short of dowel pins in the back of the motor
  7. Guinness

    replacement 4r100

    gee, thanks
  8. Guinness

    replacement 4r100

    I dont really want to spend $5000+ on a transmission for my truck, anyone have any luck with the remans on ebay or similar? It would be nice to have one of the big 3 trans rebuilders trans but the money they want is wayyy to much. Almost $5000 for the bare trans I bought the truck used, its a...
  9. Guinness

    The New Super Duty For 2011

    They are so ugly I had to post again.. ****
  10. Guinness

    The New Super Duty For 2011

    The fender flairs?? are you kidding me? they look like they copied the crappy dodge ones
  11. Guinness

    flexpate problems threaten labor day vacation..

    For those following this, The doubled up flexplate gave up the ghost last week and just got around to replacing it today. On the old doubled up one I just doubled up the dished portion and had it tigged. It broke both centers right at the bolts, and I had left out the little reinforcment...
  12. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    Got the tires on Friday and put them on today, BIG difference from the worn out swampers I will post some pictures in a day or 2
  13. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    I called and got the tracking number I was promised on the 4th call to them, it says they were shipped yesterday and should arrive on april 3rd. no wonder I couldnt get a tracking number until now. It aint so bad that its taking so long, just wish I wasnt given 3 different arrival dates when...
  14. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    well, still no tires and wheels from auqasun.. any day now they said they would get me a tracking number. Im about ready to cancel - not really what I expected after dropping $5,000
  15. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    Hope to get them this Friday,. said they would send a tracking number but I have yet to receive that.
  16. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    I ended up going with the 22.5 with sumitomo 908 traction tires.. thanks to all that replied. hopefully will be here next week.
  17. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    Thanks everyone for the replies. I am just a little gun shy since I have been noticing "the pattern". Bear with me, but when you break anything or something is leaking and go to buy the part the guy looks at you and says "How did you break that, I never even seen one of those before" or they...
  18. Guinness

    Ball joints done, now what?

    Are you sure it cant be the tires? Usually the tires wear uneven when the balljoints go bad, now that they are trying to wear evenly you only have contact patches on the inside or outside of the tire, bumps and uneven road would make it worse. Smaller contact patches will make it feel sloppy and...
  19. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    Thanks, any ideas about tire sizes? I do go offroad, like construction style, nothing serious so I was looking for something with a decent ride on pavement, average mud and dirt capable. I know the over the road steering tires is not really what i want so I was leaning toward an even size like...
  20. Guinness

    DRW tires and wheels, 22.5, 22 or 24? Super single?

    Im due for inspection and my PSD DRW needs new tires, the wheels are also pretty beat up. I came into some money and I am looking for something interesting so I was thinking about a super single kit but I cant for the life of me find a picture of this done already other than on an F650...
  21. Guinness

    Retrieving DTC's

    I dont think so, but if you have a buddy with a programmer - it will work on your truck to just get the dtcs. They arent just locked to the truck they program in that way.
  22. Guinness

    rant Dammy this POS!!

    Seriously? :lmao
  23. Guinness

    flexpate problems threaten labor day vacation..

    So far so good with the doubled up flexplate. I did have a small interference issue at startup where the flexplate "ticked" against something in the bellhousing but it went away in a few minutes. Other than that I did have to use welded on washers to space out the torque converter where the...
  24. Guinness

    Help a fire company with an alternator issue - 2001 7.3

    I got a voice mail from pa-performance to confirm that their alternator will put out 130 amps at idle on the 7.3. We will probably go that route. Was told the truck was originally ordered with dual alternators, one was removed and the generator was put in.
  25. Guinness

    Help a fire company with an alternator issue - 2001 7.3

    What Tbar has posted in his first post is what is installed in the truck already to run the halogen scene lighting, it also has a seperate controller in the cab for the high(er) idle. Im assuming the real alternator is buried in there somewhere, but our tac units engine compartment looks...

Members online

No members online now.
Total: 171 (members: 0, guests: 171)

Forum statistics

Threads
30,517
Messages
266,072
Members
14,629
Latest member
Colvinecoboost14

Latest posts

Top